Amiga Hardware DatabaseManufacturer “Georg Braun”
7 expansions in database
Manufacturer Georg Braun, Germany | Date 2006 | Amiga A4000 | Interface video slot |
- deinterlacer
- a do it yourself deinterlacer card based on A2320 components
- everything needed to build the card (layout and PLD / GAL files) is available on the author's website
- uses two Amber chips to achieve 24 bit colour depth
- doubles all 15.75 kHz screen modes to 31.5 kHz
- dual port static RAM bank
- full overscan support
- bypass jumper
- HD15 VGA connector
front side
- a2320_aga.zip
Georg Braun
schematics, board layout, user manual (german)
280 kB
Manufacturer Georg Braun, Germany | Date 2005 | Amiga A1000 | Autoconfig ID 2092 / 6 |
- IDE controller
- the board is based on the BSC AT-Bus 2008 but designed to fit inside an A1000 with the Phoenix motherboard
- a do it yourself project - everything needed to build the board (layout and PLD / GAL files) is available on the author's website (an At-Bus 2008 card should be used as donor)
- the memory expansion is omitted
- connects to the Zorro slot on the Phoenix motherboard
- phoenix_ide.zip
Georg Braun
schematics, board layout, CPLD JEDEC files
94 kB
Manufacturer Georg Braun, Germany | Date 2005 | Amiga A1000 | Autoconfig ID 5012 / 21 |
- 4 MB 16 bit SRAM for the Phoenix A1000 motherboard
- autoconfigs into the 24 bit address space
- connects to the front panel expansion slot
- can be put into the case and electrostatic shield of the Commodore A1050
- Phoenix_RAM.zip
Georg Braun
schematics, board layout, CPLD JEDEC file
93 kB
Manufacturer Georg Braun, Germany | Date 2005 | Amiga A1000 | Autoconfig ID 5012 / 115012 / 12 |
- accelerator for the Phoenix A1000 motherboard
- processor
- 68030 / 68EC030 @ 32 / 40 MHz, PGA
- 68882 @ 32 / 40 MHz, PGA
- memory
- 4 MB 32 bit SRAM
- RAM access in 3 clock cycles but no support for burst mode
- memory can be autoconfigured in the 24 bit address space or mounted in the 32 bit address space using AddMem
- notes
- Phönix-Turbo II is a do it yourself project - everything needed to build the board (layout and PLD / GAL files) is available on the author's website
- Phönix-Turbo-FE is essentially the same card, but available as a complete product with additional 512 kB Flash memory
- connects into the 96 pin DIN connector on the Phoenix motherboard
- no 68000 fallback mode
Phönix-Turbo FE, front side
Phönix-Turbo II, front side
Phönix-Turbo II, back side
- ph_turbo.zip
Georg Braun
Phönix-Turbo II schematics, board layout, CPLD JEDEC files
217 kB - ph_turbo_fe.zip
Georg Braun
Phönix-Turbo FE user manual, schematics, board layout, CPLD JEDEC files
707 kB
Manufacturer Georg Braun, Germany | Date 2005 | Amiga A1000 | Autoconfig ID 5012 / 13 |
- accelerator for the Phoenix A1000 motherboard
- processor
- 68030 / 68EC030 @ 25 - 50 MHz, PGA
- 68882 @ 25 - 50 MHz, PGA
- memory
- 8 MB 32 bit SRAM
- RAM access in 2 clock cycles but no support for burst mode
- memory can be autoconfigured in the 24 bit address space or mounted in the 32 bit address space using AddMem
- 512 kB Flash memory
- notes
- a do it yourself project - everything needed to build the board (layout and PLD / GAL files) is available on the author's website
- connects into the 96 pin DIN connector on the Phoenix motherboard
- no 68000 fallback mode
- ph_speed.zip
Georg Braun
user manual, schematics, board layout, CPLD JEDEC files
707 kB
Manufacturer Georg Braun, Germany | Date 2005 | Amiga A1000 |
- deinterlacer
- reproduction of the Commodore A2320 designed for the video slot on the Phoenix A1000 motherboard
- doubles all 15.75 kHz screen modes to 31.5 kHz
- HD15 VGA connector
- full overscan support
- dual port static RAM bank - new video and cleaned video are read in and outputted simultaneously
- Phoenix_VGA.zip
Georg Braun
schematics, board layout
86 kB
Manufacturer Georg Braun, Germany | Date 2005 | Amiga A1000 |
- reproduction of the SupraTurbo 28 designed for the Phoenix A1000 motherboard
- uses the components of the original SupraTurbo 28 board
- 68HC000 @ 28 MHz
- can be slowed down by software to 7.14 MHz without rebooting
- 16 kB static RAM cache
- 68k_turbo.zip
Georg Braun
schematics, board layout
69 kB