Amiga Hardware DatabaseManufacturer BSC / Alfa Data, Germany | Date 1992 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2049 / 62092 / 6 |
- IDE controller
- the board is basically the combination of the A.L.F. IDE controller and the MemoryMaster memory expansion cards
- uses polled I/O, not DMA transfer
- RDB compatible
- 40 pin internal IDE header
- place for a 3.5" hard disk on the card
- delivered with A.L.F. 2 driver software
- during transfers the high and low bytes are swapped as the A600/A1200/A4000 and PCs do so the drives formatted with them can be handled by the AT-Bus 2008
- hard disk activity LED connector
- memory
- sixteen ZIP sockets accept 8 MB RAM
- supports either static column or page mode ZIPs
- accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB configurations
- RAM and HD can be disabled separately by jumper
front side
back side
front side
back side
- BSC-HD.pdf
Controller Hardware and Software Installation Manual (english/german)
443 kB
- ATBus2008.dms
install disk
223 kB - AlfaPower_AT-Bus_ROM-610.zip
ROM v6.10
13 kB - oktapus.lha
Aminet
OktaPussy v2.1 (24.11.98)
106 kB
Advert (US)
1994-02
Advert (US)
1994-05
Advert (DE)
1991-11