Amiga Hardware DatabaseHersteller Phoenix Electronics, USA | Datum 1989 | Amiga A1000, A500 | Schnittstelle seitl. Erweiterungsport |
Nur englische Beschreibung vorhanden:
- Zorro II expansion chassis
- two Zorro II slots
- connects to the side expansion port, has passthrough connector
- unbuffered design, supports only one DMA device
- lack of buffering means that configuring information must pass from one card to the next:
- a jumper allows use of the second slot if the first is unoccupied
- another jumper lets using peripherals connected to the passthrough connector in case both slots are empty
- optional internal power supply with power connector for a hard disk drive
- does not supply -12V to the Zorro slots
- no power switch
- variations
- Expansion Technologies has sold it under the name ToolBox, but only Phoenix has manufacured it
- the only difference is the logo on the chassis
no PSU 1 Amp PSU 3 Amp PSU A1000 EEC-2100
PEC-2100EEC-2110
PEC-2110EEC-2120
PEC-2120A500 EEC-2500
PEC-2500EEC-2510
PEC-2510EEC-2520
PEC-2520 - PEC: Phoenix Expansion Chassis
- EEC: Expansion Technologies ToolBox
- compatibility
- boards reported to be working:
- Commodore A2052
- Commodore A2058
- Commodore A2088XT
- Commodore A2090
- Commodore A2090A
- IVS TrumpCard
- MicroBotics 8-Up
- Phoenix PEC-2000 / Expansion Technologies Flash!Card
- Xetec FastCard
- boards reported to be not working:
- ASDG Dual Serial Board
- C-Ltd Kronos
- Checkpoint Serial Solution
- GVP Impact SCSI
- Microbotics HardFrame
- Supra 2400zi
Vorderseite
Rückseite
Werbung (US)
1989-03