Expansion Chassis
Manufacturer
Phoenix Electronics, USA
Date
1989
Amiga
A1000, A500
Interface
side expansion port
    Zorro II expansion chassis
  • two Zorro II slots
  • connects to the side expansion port, has passthrough connector
  • unbuffered design, supports only one DMA device
  • lack of buffering means that configuring information must pass from one card to the next:
    • a jumper allows use of the second slot if the first is unoccupied
    • another jumper lets using peripherals connected to the passthrough connector in case both slots are empty
  • optional internal power supply with power connector for a hard disk drive
  • does not supply -12V to the Zorro slots
  • no power switch
    variations
  • Expansion Technologies has sold it under the name ToolBox, but only Phoenix has manufacured it
  • the only difference is the logo on the chassis
     no PSU1 Amp PSU3 Amp PSU
    A1000EEC-2100
    PEC-2100    		EEC-2110
    PEC-2110    		EEC-2120
    PEC-2120
    A500EEC-2500
    PEC-2500    		EEC-2510
    PEC-2510    		EEC-2520
    PEC-2520
  • PEC: Phoenix Expansion Chassis
  • EEC: Expansion Technologies ToolBox
    compatibility
  • boards reported to be working:
    • Commodore A2052
    • Commodore A2058
    • Commodore A2088XT
    • Commodore A2090
    • Commodore A2090A
    • IVS TrumpCard
    • MicroBotics 8-Up
    • Phoenix PEC-2000 / Expansion Technologies Flash!Card
    • Xetec FastCard
  • boards reported to be not working:
    • ASDG Dual Serial Board
    • C-Ltd Kronos
    • Checkpoint Serial Solution
    • GVP Impact SCSI
    • Microbotics HardFrame
    • Supra 2400zi
Photos
Phoenix Electronics Expansion Chassis - front side
front side
Phoenix Electronics Expansion Chassis - back side
back side
Vintage Advert

Advert (US)
1989-03