Amiga Hardware DatabaseManufacturer “Prime Image”
3 expansions in database
Manufacturer Prime Image, USA | Date 1994 | Amiga A2000, A3000, A4000 |
- Y/C adapter
- converts the Video Toaster composite inputs and outputs to Y/C
- attaches directly to the Toaster backplate with its six RCA connectors and RCA to BNC adapters
- Toaster's all composite connectors are passed through (6× BNC)
- Y/C inputs (4× mini-DIN) and an output (1× mini-DIN)
- Betacam or MII compatible component output (Y/R-Y/B-Y)
- 3-way adaptive comb filter
- all inputs and outputs are available at the same (Y/C, composite, component)
- external power supply
front side
rear side
Manufacturer Prime Image, USA | Date 1992 | Amiga A2000, A3000, A4000 | Interface ISA |
- time base corrector
- composite, Y/C and genlock inputs
- composite and Y/C outputs
- transcodes simultaneously to both outputs from either input
- fully digital operation, no adjustments needed
- stable freeze frame
- variable rate strobe
- provides timing into Switcher (Video Toaster)
- vertical colour advance - 1, 2 or 3 lines
- horizontal chroma / luma adjust
- four event memory presets per board
- controlled by the host computer terminal (via serial port) or the optional remote control unit:
- proc amp video output adjustments, including video level (contrast), chroma level (stauration), hue (tint), setup (brightness)
- field or frame freeze and strobe
- horizontal and subcarrier system timing, horizontal position, Y/C delay
- input select and signal enhancement
- NTSC and PAL-M (525 lines) or PAL (625 lines) versions
- 5.5 MHz Y/C bandwidth
- 58 dB S/N ratio
front side
Manufacturer Prime Image, USA | Date 1993 | Amiga A2000, A3000, A4000 | Interface ISA |
- standards converter & time base corrector
- accepts synchronous or non-synchronous inputs
- mode selection and conversion of all world television standards: NTSC, PAL, PAL-M, SECAM (input only), PAL-N, NTSC 4.43
- converts the Video Toaster NTSC input and output to PAL
- composite, Y/C and genlock inputs
- composite and Y/C outputs
- transcodes simultaneously to both outputs from either input
- automatic gain control
- 3 levels detail enhance
- controlled by the host computer terminal (via serial port) or the optional remote control unit:
- proc amp video output adjustments, including video level (contrast), chroma level (stauration), hue (tint), setup (brightness)
- field or frame freeze and strobe
- horizontal and subcarrier system timing, horizontal position, Y/C delay
- input select and signal enhancement
- non-blurring / non averaging interpolation system
- CCIR-601 4:2:2 processing
- 5.5 MHz Y/C bandwidth
- 58 dB S/N ratio
- optional 3-way adaptive comb filter
- separates the composite signal into its two components, Y (luminance) and C (chrominance) while maintaining bandwidth
- reduces the differential phase, differential gain and K-factor specifications while ensuring the frequency response stays flat out to 5.5 MHz