Amiga Hardware DatabaseManufacturer Andre "Ratte" Pfeiffer, Germany | Date 2011 | Amiga any Amiga | Interface RGB port |
- Video Signal Switch
- automatic switch for analogue video signals e.g. the Amiga native mode and a graphics card
- switch is controlled via CTS signal from CIA-B (even CIA) chip
- an adapter for the CIA chip is required which provides power and the CTS signal to the expansion
- 1× DB15 VGA output
- 2× 10 pin pin headers for signal input A and B
- switching is done via software application SwitchControl
- special L-shaped adapter available for the Indivision AGA Mk 2 from Individual Computers - the adapter provides a 20 pin header to be connected to the flicker-fixer and plugs into the 'Amiga' or 'A' header on the board
- Notes
- manual operation is possible by cutting a trace on the board and installing a jumper
- Pin Setting
| Pins | Setting |
| 1-2 (towards back) | Automatic Mode (default) |
| 2-3 | RTG only |
| open | Native only |