Search Result
28 expansions found
A1000 SCSI A1208 SCSI + RAM (Fang) A2000 SCSI AdSCSI (Advantage) 2000 AdSCSI 2080 Apollo SCSI Blizzard SCSI Kit III Blizzard SCSI Kit IV CDTV SCSI CDTV to SCSI Interface CDTV-SCSI DataFlyer 1200 SCSI+ DataFlyer 4000 SCSI+ Golem FastSCSI/IDE Golem SCSI II (A2000) Golem SCSI II (A500) Impact A2000-1/X Impact A2000-2/X Impact A2000-SCSI+8 Impact A500-SCSI Impact A500-SCSI+4 Kommos A2000 SCSI Kommos A500 SCSI M-Tec SCSI-II Paradox SCSI SCSI Interface SCSI-TV & SCSI-TV/570 Vector SCSI & Professional SCSI
Company
C-Ltd. , USA Date
1988Amiga
A1000Interface
side expansion portAutoconfig ID
1004 / 12
SCSI controller
AMD 5380 controller IC
uses polled I/O transfers
does not autoboot, reads CLtd.device from floppy
DB25 external SCSI connector
50 pin internal SCSI header - but there is no space for mounting a hard disk inside the case
A-Max II driver (cltd.amhd)
front side
Advert (US) 1987-03 Advert (US) 1987-03 Advert (DE) 1987-06 Advert (DE) 1987-11
Fast SCSI 2 DMA controller
non standard SCSI connector - enables 2.5" drives to be connected inside the A1200
optional external SCSI kit - external DB25 connector
autoboot ROM (gvpscsi.device)
memory
two 64 pin SIMM sockets accept 8 MB RAM
supports only special 1 or 4 MB GVP SIMMs
notes
optional 68882 PLCC FPU up to 50 MHz
jumper settings
J1 - PCMCIA: OFF - compatible
J2 - SIMM size: ON - 1 MB SIMMs, OFF - 4 MB SIMMs
CN2 - FPU clock: 1-2 - from crystal, 2-3 - 14.3 MHz
J3 ON J5, J6, J7, CN4 OFF CN1, CN3 1-2 - reserved
front side
back side
Advert (US) 1993-03 Advert (US) 1993-06 Advert (FR) 1993-07
Company
C-Ltd. , USA Date
1987Amiga
A2000, A3000, A4000Interface
Zorro IIAutoconfig ID
1004 / 12
SCSI controller
AMD 5380 controller IC
uses polled I/O transfers
does not autoboot, reads CLtd.device from floppy
DB25 external SCSI connector
50 pin internal SCSI header - but there is no space for mounting a hard disk on the card
A-Max II driver (cltd.amhd)
two screw holes to mount a SCSI-to-MFM converter card
front side
with SCSI-MFM converter, front side
back side
Company
ICD, USA Date
1990Amiga
A2000, A3000, A4000Interface
Zorro IIAutoconfig ID
2071 / 1
SCSI controller
half length card - mounting frame allows the installation of a 3.5" drive inline with the card
50 pin internal header
DB25 external connector
autoboot ROM (icddisk.device or icdscsi.device) - autobooting requires at least Kickstart 1.3
RDB and SCSI Direct compatible
fully supports removable media devices
game jumper (disables the whole controller), autoboot disable jumper, HD cache disable jumper
pressing the left mouse button during startup disables HD automount, pressing the right mouse button disables HD cache
SCSI networking
A-Max II driver (icddisk.amhd)
jumper settings
A - autoboot ROM: ON - enable
B - caching: ON - enable
GAME - card: ON - disable
ID0-ID2 - SCSI ID
front side
front side
with bracket, front side
without bracket, front side
back side
ICDPrepHD-42.dms
install disk v4.2 ICDPrepHD v4.2, adide.device v4.0r1, adscsi.device v4.0r1, icddisk.device v3.5r1, trifecta.device v4.0r1 117 kB ICDPrepHD-40.dms
install disk v4.0 ICDPrepHD v4.0 adide.device v4.0r1, adscsi.device v4.0r1, icddisk.device v3.5r1, trifecta.device v4.0r1 117 kB icd_advantage.dms
Installer's Heaven install disk 316 kB
Advert (US) 1990-05 Advert (DE) 1990-07
Company
ICD, USA Date
1991Amiga
A2000, A3000, A4000Interface
Zorro IIAutoconfig ID
2071 / 1,4
SCSI controller
50 pin internal header
DB25 external connector
autoboot ROM (icdscsi.device) - autobooting requires at least Kickstart 1.3
RDB and SCSI Direct compatible
fully supports removable media devices
game jumper (disables the whole controller), autoboot disable jumper, HD cache disable jumper
pressing the left mouse button during startup disables HD automount, pressing the right mouse button disables HD cache
A-Max II driver (icddisk.amhd)
SCSI networking
memory
eight 30 pin SIMM sockets accept 8 MB RAM
accepts 1 MB SIMMs in groups of two giving 2, 4, 6, 8 MB configurations
memory disable jumper
AdSCSI 2000 has no RAM expansion
front side
back side
ICDPrepHD-42.dms
install disk v4.2 ICDPrepHD v4.2, adide.device v4.0r1, adscsi.device v4.0r1, icddisk.device v3.5r1, trifecta.device v4.0r1 117 kB ICDPrepHD-40.dms
install disk v4.0 ICDPrepHD v4.0, adide.device v4.0r1, adscsi.device v4.0r1, icddisk.device v3.5r1, trifecta.device v4.0r1 117 kB icd_advantage.dms
Installer's Heaven install disk 316 kB
Advert (US) 1991-02
Company
ACT Elektronik, Germany Date
1995Amiga
A1200
SCSI 2 controller
software based, non-DMA SCSI 2 controller for the Apollo 12x0 series processor boards
supports the RDB standard
not compatibile with many SCSI devices
external DB25 connector
front side
front side
SCSI controller
the optional Fast SCSI 2 DMA controller for the Blizzard 1230 III processor card
Qlogic FAS408 controller IC
external DB25 SCSI connector
front side
front side
back side
SCSI controller
the optional Fast SCSI 2 DMA controller for the Blizzard 1230 IV and Blizzard 1240/1260 processor cards
Qlogic FAS216 controller IC
7 MB/s asynchronous, 10 MB/s synchronous transfer speed
additional 72 pin SIMM socket accepts up to 128 MB RAM
external DB25 female SCSI connector
supported by Linux, NetBSD and OpenBSD
with cable, front side
front side
back side
front side
Company
Commodore, USA Amiga
CDTVAutoconfig ID
514 / 106
No description available.
Company
W.A.W. Elektronik, Germany Date
1994Amiga
CDTVInterface
side expansion port
SCSI controller
AMD 33C93 clocked at 16 MHz
connects to the DMA expansion slot
fits completely into the case
autoboot capability
50 pin internal SCSI header
DB25 external SCSI connector
disable switch
RDB compatible
no place for hard disk on the expansion itself, thus it has to be mounted on the internal RF shield
no power connector, the HD gets connected to the power supply of the CD drive with a Y adaptor
front side
back side
Advert (DE) 1993-02 Advert (DE) 1993-06 Advert (DE) 1993-10
Company
Matthias Heinrichs, Germany Date
2013Amiga
CDTV
SCSI controller
Implementation of the Commodore reference design (A575)
internal 50 pin SCSI connector
passive termination
switchable clock 16Mhz / 7MHz for WD33C93A / AM33C93A
disable jumper
activity LED
installs internally, original slot cover can be mounted after installation
supports autoconfig and autoboot (scsi.device)
RDB compatible
maximum partition size with ROM v2.30: 1GB
front side
empty PCB, front side
empty PCB, rear side
rear side
Company
Expansion Systems, USA Date
1994Amiga
A1200Interface
IDE header
SCSI controller
mounts onto the IDE header
converts the signals on the IDE header to also run SCSI devices at the same time
operates up to five SCSI devices (ID 0 and 1 are reserved for the two IDE devices, ID 2-7 are for SCSI)
cannot autoboot SCSI drives (ExpXDS.device)
IDE passthrough for the original IDE drives
DB25 external SCSI connector
front side
front side
Company
Expansion Systems, USA Date
1994Amiga
A4000Interface
IDE header
SCSI controller
mounts onto the back expansion panel and connects to the IDE header with a ribbon cable
converts the signals on the IDE header to also run SCSI devices at the same time
operates up to five SCSI devices (ID 0 and 1 are reserved for the two IDE devices, ID 2-7 are for SCSI)
cannot autoboot SCSI drives (ExpXDS.device)
IDE passthrough for the original IDE drives
DB25 external SCSI connector
50 pin internal SCSI header
front side
front side
back side
back side
Company
Kupke, Germany Date
1994Amiga
A2000, A3000, A4000Interface
Zorro IIAutoconfig ID
2073 / 5
Fast SCSI 2 and IDE controller
FAS216 SCSI controller IC
transfer speed is limited by the Zorro II interface
50 pin internal SCSI header
40 pin internal IDE header
DB25 external SCSI connector
RDB and SCSI Direct compatible
autoboot ROM
hard disk activity LED connector
place for a 3.5" hard disk on the card
disable switch at the back of the card
IDE part can be separately disabled
front side
back side
Company
Great Valley Products , USA Date
1988Amiga
A2000, A3000, A4000Interface
Zorro IIAutoconfig ID
2017 / 1,2,3
SCSI 2 DMA controller
WD 33C93 controller IC
autoboot ROM (optional on early versions) - autobooting requires at least Kickstart 1.3
has no autoboot disable jumper - the autoboot ROMs have to be removed under Kickstart 1.2
50 pin internal SCSI header
DB25 external connector
hard disk activity LED connector
no place for mounting a hard disk on the card
memory
32 DIP sockets accept up to 1 MB RAM
accepts 256k×1 DIPs
early revisions support 512 kB or 1 MB configurations
late revisions support 0 or 1 MB configurations
DMA between drive and 4 kB onboard SRAM
late revisions: depending on the RAM configuration, one of two PAL chips has to be installed ( 0 MB = PAL with red label, 1 MB = PAL with blue label) in location U74
jumper settings
Jumper Configuration Setting
J3 Memory Size 0 or 512 kB - ON 1 MB - OFF
front side
Advert (US) 1988-05 Advert (US) 1988-08
Company
Great Valley Products , USA Date
1989Amiga
A2000, A3000, A4000Interface
Zorro IIAutoconfig ID
2017 / 1,2,3
SCSI 2 DMA controller
WD 33C93 controller IC
autoboot ROM (optional on early versions) - autobooting requires at least Kickstart 1.3
has no autoboot disable jumper - the autoboot ROMs have to be removed under Kickstart 1.2
50 pin internal SCSI header
DB25 external connector
hard disk activity LED connector
no place for mounting a hard disk on the card
memory
eight 30 pin SIMM sockets accept up to 8 MB RAM
accepts 1 MB SIMMs in groups of two
DMA between drive and 16 kB onboard SRAM
front side
Advert (DE) 1990-03 Advert (US) 1990-03 Advert (FR) 1990-04 Advert (US) 1990-06
SCSI 2 DMA controller
DMA to onboard 16 kB buffer
RDB compatible
place for a 3.5" hard disk inside the case
50 pin internal header
DB25 external connector
Impact A500-2/X
optional autoboot / RAM board
2 MB zero wait-state RAM
sixteen 1M×1 DIPs
autoboot ROM - autobooting requires at least Kickstart 1.3
notes
connects to the side expansion port
has no passthrough connector
hard disk activity LED
built in fan
external power supply
Autoboot / RAM module, front side
Case opened, right side
Exterior, front side
Exterior, back side
Exterior, right side
Exterior, left side
Advert (DE) 1989-04 Advert (US) 1988-05 Advert (US) 1988-08 Advert (US) 1988-11 Advert (US) 1988-12 Advert (US) 1989-01 Advert (US) 1989-02 Advert (US) 1989-06
SCSI 2 DMA controller
DMA to onboard 16 kB buffer
onboard autoboot ROM - autobooting requires at least Kickstart 1.3
autoboot disable switch
RDB compatible
place for a 3.5" hard disk inside the case
50 pin internal header
DB25 external connector
memory
four 30 pin SIMM sockets accept up to 4 MB RAM
accepts 1 MB SIMMs
supports 2 or 4 MB configurations
fully autoconfiguring
notes
connects to the side expansion port
has no passthrough connector
hard disk activity LED
built in fan
external power supply
front side
back side
Advert (US) 1989-12 Advert (US) 1990-03
Company
Jürgen Kommos, Germany Date
1991Amiga
A2000, A3000, A4000Interface
Zorro II
SCSI 2 controller
place for a 3.5" hard disk on the card
the SCSI cable is soldered onto the card and there is no external SCSI connector - a T-adapter is required to add more than one SCSI device, by placing the controller in the middle of the SCSI chain
autoboot ROM (jkscsi.device)
not RDB compatible
front side
back side
Company
Jürgen Kommos, Germany Date
1991Amiga
A500Interface
side expansion port
SCSI 2 controller
place for a 3.5" hard disk inside the case
50 pin internal SCSI header
no external SCSI connector
autoboot ROM (jkscsi.device)
no RAM option
passthrough connector
front side
back side
Company
M-Tec, Germany Date
1994Amiga
A1200Autoconfig ID
2192 / 33
SCSI controller
an optional SCSI controller for the M-Tec T1230 processor card
NCR 53CF94
external DB25 SCSI connector
40 pin internal SCSI header
does not use DMA transfer
autoboot ROM (mtecscsi.device)
front side
back side
Connector board, front side
Company
Mainhattan Data, Germany Date
1993Amiga
any AmigaInterface
parallel port
SCSI adapter
converts the parallel port signals to SCSI signals
a 5×4×1 cm box
connects to the parallel port and provides a DB25 SCSI connector - the parallel port is not passed through
some versions get power from the RGB port, others from the mouse/game port - in both cases the port is passed through
very slow - the parallel port limits the data transfer
can reboot, but cannot autoboot
RDB compatible
compatible with the A2088XT and A2286AT with BridgeBoard software from or after 23.11.88.
Case, top side
Board, front side
Board, back side
Company
Alcomp, Germany Date
1990Amiga
A2000, A3000, A4000Interface
Zorro II
SCSI 2 controller
place for a 3.5" hard disk on the card's hard frame
two 50 pin internal headers
no external SCSI connector
autoboot ROM
no RAM option
bundled with tape streamer and hard disk
front side
back side
Advert (DE) 1989-11 Advert (DE) 1989-11 Advert (DE) 1990-11
Company
AmiTrix Development, Canada Date
1994Amiga
A500, CDTV
SCSI controller
connects to the CDTV or A570 rear expansion port
place for a 2.5" hard disk (Quantum GO, GLS, Daytona drives)
SCSI-TV for the CDTV protrudes 1.75 inches out the back of the CDTV, and includes a black endcap for the unit
SCSI-TV/570 for the A570 extends 5 inches out the back of the A570, and includes a white endcap for the unit
50 pin internal header - an adapter is included to connect 2.5" drives
DB25 external connector
RDB compatible
supports SCSI Direct
autoboot capability - Workbench 1.3 is supplied which is required for autobooting
uses DMA transfers - the DMA circuit is already built in the CD controller of the CDTV or A570
disable switch - required for playing audio CDs
Company
HK-Computer, Germany Date
1990Amiga
A2000, A3000, A4000Interface
Zorro IIAutoconfig ID
41233 / 1
SCSI 2 controller
place for a 3.5" hard disk on the card
50 pin internal header
autobootROM (vector.device) - autobooting requires at least Kickstart 1.3
Vector SCSI is RDB compatible, Professional SCSI is not
disable jumper
does not work with some Seagate and Fujitsu hard disks
developed by W. Heinen and Jürgen Kommos
front side
back side