Amiga Hardware DatabaseManufacturer Kupke, Germany | Date 1990 | Amiga A500 | Interface side expansion port | Autoconfig ID 2073 / 2 |
- SCSI 2 controller
- RDB compatible
- uses polled I/O instead of DMA transfers
- autoboot ROM - autobooting requires at least Kickstart 1.3
- 50 pin internal SCSI header
- DB25 external connector
- place for a 3.5" hard disk inside the case
- hard disk activity LED
- disable switch
- optional memory board - Golem RAM-Card 500
- 64 DIP sockets accept 2, 4 or 8 MB RAM
- takes 1×1M DIPs
- 32 of the 64 DIP sockets are on a daughterboard
- takes away the space from the internal hard disk
- optional processor board - Golem 68030
- 68030 @ 14 MHz
- optional FPU
- 32 DIP sockets for up to 16 MB RAM
- takes 256k×4 or 1M×4 chips
- leaves no space for the internal hard disk
- notes
- connects to the side expansion port, has passthrough connector
- built-in Kickstart switcher with 5 ROM sockets
Main board, front side
Main board, back side
Memory daughterboard, front side
Memory daughterboard, back side
- GolemSCSI.dms
install disk
317 kB
Advert (US)
1990-11
Advert (DE)
1991-10
Advert (DE)
1992-02
Advert (DE)
1992-04
Advert (DE)
1992-12
Advert (DE)
1990-11
Advert (DE)
1991-05
Advert (DE)
1991-05