Amiga Hardware DatabaseSearch Result
9 expansions found
Manufacturer Expansion Systems, USA | Date 1991 | Amiga A1000 | Interface side expansion port |
- SCSI or IDE controller
- the case contains a standard Zorro II DataFlyer 2000 SCSI or IDE controller card and optionally a DataFlyer RAM board
- place for a 3.5" HD inside the case, underneath the two Zorro II cards
- connects to the side expansion port - no passthrough connector
- DataFlyer 1000 SCSI:
- AMD 5380 SCSI controller
- 50 pin internal SCSI header
- optional external DB25 connector
- DataFlyer 1000 IDE:
- 40 pin internal IDE header
- hard disk activity LED on front of the case
- optional internal power supply:
- mounts inside the DataFlyer 1000 case
- provides power for the controller card, memory card and the hard disk
- turns on automatically when the A1000 is powered up
- automatically senses all international input voltages
- optional external power supply
- powers the memory card only
- has to be turned on manually before the A1000 is powered up
- separate versions for different international input voltages
- the unit can also take power from the A1000 without using an additional power supply
- autoboot ROM (ExpSys.device) - autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
- autobooting can be also disabled by holding down the left mouse button during the boot sequence
- RDB compatible
- A-Max II driver (ExpSys.amhd)
front side
front side
back side
left side
inside side
- DataFlyer1000.pdf
User Manual
4.4 MB - DataFlyer1000_TechnicalNote.pdf
Technical Supplement
436 kB
Advert (US)
1992-02
Manufacturer Expansion Systems, USA | Date 1994 | Amiga A1200 | Interface IDE header |
- SCSI controller
- mounts onto the IDE header
- converts the signals on the IDE header to also run SCSI devices at the same time
- operates up to five SCSI devices (ID 0 and 1 are reserved for the two IDE devices, ID 2-7 are for SCSI)
- cannot autoboot SCSI drives (ExpXDS.device)
- IDE passthrough for the original IDE drives
- DB25 external SCSI connector
front side
front side
Manufacturer Expansion Systems, USA | Date 1990 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- SCSI controller
- AMD 5380 SCSI controller
- 50 pin internal SCSI header
- optional external DB25 connector
- half length card with optional hard frame
- place for a 3.5" hard disk either on the back of the card or on the optional hard frame
- hard disk power connector
- hard disk activity LED connector, individual for SCSI and IDE
- expansion header for the optional DataFlyer RAM board
- autoboot ROM (ExpSys.device) - autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
- autobooting can be also disabled by holding down the left mouse button during the boot sequence
- RDB compatible
- A-Max II driver (ExpSys.amhd)
Advert (US)
1992-02
Advert (US)
1991-06
Manufacturer Expansion Systems, USA | Date 1994 | Amiga A4000 | Interface IDE header |
- SCSI controller
- mounts onto the back expansion panel and connects to the IDE header with a ribbon cable
- converts the signals on the IDE header to also run SCSI devices at the same time
- operates up to five SCSI devices (ID 0 and 1 are reserved for the two IDE devices, ID 2-7 are for SCSI)
- cannot autoboot SCSI drives (ExpXDS.device)
- IDE passthrough for the original IDE drives
- DB25 external SCSI connector
- 50 pin internal SCSI header
front side
back side
front side
back side
- DataFlyer4000-12e.dms
install disk v1.2E
427 kB
Manufacturer Expansion Systems, USA | Date 1991 | Amiga A500 | Interface side expansion port |
- SCSI or IDE controller
- the case contains a standard Zorro II DataFlyer 2000 SCSI or a DataFlyer Plus SCSI/IDE controller card and optionally a DataFlyer RAM board
- place for a 3.5" HD inside the case, behind the two Zorro II cards
- connects to the side expansion port - no passthrough connector
- DataFlyer 500 SCSI:
- AMD 5380 SCSI controller
- 50 pin internal SCSI header
- optional external DB25 connector
- DataFlyer 500 IDE:
- 40 pin internal IDE header
- hard disk activity LED on top of the case
- optional internal power supply:
- mounts inside the DataFlyer 500 case
- provides power for the controller card, memory card and the hard disk
- turns on automatically when the A500 is powered up
- automatically senses all international input voltages
- optional external power supply
- powers the memory card only
- has to be turned on manually before the A500 is powered up
- separate versions for different international input voltages
- the unit can also take power from the A500 without using an additional power supply
- autoboot ROM (ExpSys.device) - autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
- autobooting can be also disabled by holding down the left mouse button during the boot sequence
- RDB compatible
- A-Max II driver (ExpSys.amhd)
SCSI version, front side
SCSI version, back side
SCSI version, inside side
- DataFlyer-37e.dms
install disk v3.7E
387 kB
Advert (US)
1992-02
Advert (US)
1991-06
Manufacturer Expansion Systems / BSC, USA | Date 1992 | Amiga A500 | Interface side expansion port | Autoconfig ID 8290 / 1,2 |
- SCSI and IDE controller
- unlike the DataFlyer 500 (not Express), this unit does not use the DataFlyer 2000 and DataFlyer RAM Zorro II cards, but a single custom designed circuit board
- 40 pin internal IDE header
- 50 pin internal SCSI header
- DB25 external SCSI connector
- place for a 3.5" hard disk inside the case
- hard disk activity LED on top of the case
- autoboot ROM, autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
- autobooting can be also disabled by holding down the left mouse button during the boot sequence
- RDB compatible
- A-Max II driver
- memory
- eight 30 pin SIMM sockets accept up to 8 MB RAM
- supports 256 kB and 1 MB SIMMs
- possible configurations are 0.5, 1, 2, 4 and 8 MB
- SIMM sizes cannot be mixed
- notes
- connects to the side expansion connector, no passthrough connector
- can use power from the A500 or from the optional external power supply
Advert (US)
1992-06
Manufacturer Expansion Systems, USA | Date 1991 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- SCSI and/or IDE controller
- three versions, all share the same board with the necessary parts installed only
- DataFlyer 2000 SCSI (2000s):
- AMD 5380 SCSI controller
- 50 pin internal SCSI header
- optional external DB25 connector
- DataFlyer 2000 IDE (2000e):
- 40 pin internal IDE header
- DataFlyer 2000 SCSI+IDE has all the parts installed
- half length card with optional hard frame
- place for a 3.5" hard disk either on the back of the card or on the optional hard frame
- hard disk power connector
- hard disk activity LED connector, individual for SCSI and IDE
- expansion header for the optional DataFlyer RAM board
- autoboot ROM (ExpSys.device) - autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
- autobooting can be also disabled by holding down the left mouse button during the boot sequence
- RDB compatible
- A-Max II driver (ExpSys.amhd)
IDE version, front side
IDE version, back side
SCSI version, front side
SCSI and IDE version, front side
SCSI and IDE version, front side
- DataFlyer-37e.dms
install disk v3.7E
387 kB - dataflyerScsiPlus.DMS
Installer's Heaven
install disk
390 kB
Manufacturer Expansion Systems, USA | Date 1991 | Amiga A500, A1000, A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 8290 / 2 |
- eight 30 pin SIMM sockets accept up to 8 MB RAM
- supports 256 kB and 1 MB SIMMs
- possible configurations are 0.5, 1, 2, 4 and 8 MB
- SIMM sizes cannot be mixed
- A500 version connects to side expansion port
front side
front side
- DataFlyerRAM.pdf
User Manual
4.4 MB
Manufacturer Expansion Systems, USA | Date 1993 | Amiga A600, A1200 | Interface IDE header |
- external IDE case
- connects to the Amiga internal IDE header by a ribbon cable
- place for a 3.5" or 2.5" drive inside the case (40 and 44 pin IDE connectors)
- works together with the built-in hard disk of the A1200 / A600
- power can be supplied by the Amiga (from the internal floppy power connector) or by an external power supply
- autobooting and automounting (by the Kickstart ROM)
- the A600 must have Kickstart v37.350
front side
inside side