Amiga Hardware DatabaseCompany Expansion Systems, USA | Date 1991 | Amiga A500 | Interface side expansion port |
- SCSI or IDE controller
- the case contains a standard Zorro II DataFlyer 2000 SCSI or a DataFlyer Plus SCSI/IDE controller card and optionally a DataFlyer RAM board
- place for a 3.5" HD inside the case, behind the two Zorro II cards
- connects to the side expansion port - no passthrough connector
- DataFlyer 500 SCSI:
- AMD 5380 SCSI controller
- 50 pin internal SCSI header
- optional external DB25 connector
- DataFlyer 500 IDE:
- 40 pin internal IDE header
- hard disk activity LED on top of the case
- optional internal power supply:
- mounts inside the DataFlyer 500 case
- provides power for the controller card, memory card and the hard disk
- turns on automatically when the A500 is powered up
- automatically senses all international input voltages
- optional external power supply
- powers the memory card only
- has to be turned on manually before the A500 is powered up
- separate versions for different international input voltages
- the unit can also take power from the A500 without using an additional power supply
- autoboot ROM (ExpSys.device) - autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
- autobooting can be also disabled by holding down the left mouse button during the boot sequence
- RDB compatible
- A-Max II driver (ExpSys.amhd)
SCSI version, front side
SCSI version, back side
SCSI version, inside side
- DataFlyer-37e.dms
install disk v3.7E
387 kB
Advert (US)
1992-02
Advert (US)
1991-06