Nur englische Beschreibung vorhanden:
SCSI 2 controller
- FAS216 controller IC
- uses polled I/O, not DMA transfer
- autoboot ROM - autoboots even under Kickstart 1.2
- version 2.2 and below does not support streamers and is not RDB compatible
- 50 pin internal header
- DB25 external SCSI connector
- place for a 3.5" hard disk inside the case
- disable switch
- connects to side expansion port, no passthrough connector
- A-Max II and Medusa drivers
MacroSystem version (1991)
- two 30 pin SIP sockets for up to 8 MB RAM
- accepts 1 or 4 MB SIPs in pair
- jumper settings:
- jumper towards EPROMs: sets eprom size, jumper is set by default
- jumper towards front: limits maximum memory to 2MB if set (to allow other expansions to exist in 8MB address space), jumper is unset by default
Off Limits version (1993)
- two 30 pin SIMM sockets for up to 8 MB RAM
- accepts 1 or 4 MB SIMMs in pair
- the same PCB is used for the Zorro II version