Amiga Hardware DatabaseSearch Result
27 expansions found
Company Phase 5 Digital Products, Germany | Date 1993 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 6 |
- 4 MB 80 ns RAM on board (eight DIP chips)
- expandable to 8 MB with the Add-4 Board via the 62 pin expansion port
- optional PLCC FPU, 68881 / 68882 @ 14, 20 - 40 MHz
- without an oscillator the FPU can run only at 14 MHz
- with a suitable oscillator installed, it can run between 20 and 40 MHz
- battery backed up clock - it was optional on earlier revisions
Board with clock, front side
Board without clock, front side
Board without clock, back side
Board with clock, front side
Board with clock, back side
Advert (DE)
1993-04
Advert (DE)
1993-06
Advert (DE)
1993-10
Company Phase 5 Digital Products, Germany | Date 1994 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 6,12 |
- processor
- 68EC020 @ 28 MHz QFP
- optional PLCC FPU, 68881 @ 14 MHz - 68882 @ 40 MHz
- memory
- 4 MB 70 ns RAM on board (eight DIP chips)
- expandable to 8 MB with special Add-4 Board
- notes
- disable switch
- battery backed up clock
front side
back side
Advert (DE)
1994-05
Advert (DE)
1995-04
Advert (DE)
1995-08
Company Phase 5 Digital Products, Germany | Date 1993 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 11,13 |
- processor
- 68EC030 @ 40 MHz, QFP
- optional FPU, PLCC and PGA sockets - can be clocked synchronously or asynchronously with the 68030 up to 50 MHz
- memory
- two 72 pin SIMM sockets accept 64 MB RAM
- supports 1, 2, 4, 8, 16, 32 MB SIMMs
- hardware maprom - no need for MMU
- notes
- optional Fast SCSI 2 controller (FAS216) with DB25 external connector, supported by NetBSD and OpenBSD
- battery backed up clock
Company Phase 5 Digital Products, Germany | Date 1994 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 11,13 |
- processor
- 68EC030 @ 40 MHz or 68030 @ 50 MHz PGA
- optional FPU, PLCC and PGA sockets - can be clocked synchronously or asynchronously with the 68030 up to 50 MHz
- memory
- two 72 pin SIMM sockets accept 64 MB RAM
- supports 1, 2, 4, 8, 16, 32 MB SIMMs
- hardware maprom - no need for MMU
- notes
- optional Fast SCSI 2 controller (FAS216) with DB25 external connector, supported by NetBSD and OpenBSD
- battery backed up clock
front side
back side
Blizzard SCSI Kit II, front side
- Blizzard1230_jumpers.pdf
jumper settings (english)
37 kB
Advert (DE)
1994-05
Company Phase 5 Digital Products, Germany | Date 1995 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 11,13 |
- processor
- 68EC030 @ 40 MHz or 68030 @ 50 MHz PGA
- optional 68882 @ 25 / 33 / 50 MHz PGA
- memory
- one 72 pin SIMM socket accepts 32 MB RAM
- hardware maprom
- notes
- optional Fast SCSI 2 controller (
)
- battery backed up clock
Company Phase 5 Digital Products, Germany | Date 1995 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 17 |
- processor
- 68030 @ 50 MHz PGA
- optional 68882 @ 50 MHz PGA
- memory
- one 72 pin SIMM socket accepts up to 128 MB, 60-70 ns RAM
- maprom selectable by jumper
- automatic RAM size detection
- optional Fast SCSI 2 DMA controller (
- 7 MB/s asynchronous, 10 MB/s synchronous transfer speed
- additional 72 pin SIMM socket accepts up to 128 MB RAM
- external DB25 female SCSI connector
- supported by Linux, NetBSD and OpenBSD
)
- notes
- can be disabled with a simple keystroke
- battery backed up clock
front side
front side
back side
- BlizzardSCSI4.pdf
SCSI Kit user manual (english)
128 kB - BlizzardSCSI4-de.pdf
SCSI Kit user manual (german)
129 kB
- P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
(for driver versions before v7.x)
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Advert (DE)
1995-08
Advert (DE)
1996-05
Advert (DE)
1996-09
Company Phase 5 Digital Products, Germany | Date 1995 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 17 |
- processor
- 68040 @ 40 MHz / 68060 @ 50 MHz
- the 68040s are recycled from used Macs
- memory
- one 72 pin SIMM socket accepts up to 64 MB RAM, 70 ns or faster
- only single sided SIMMs fit
- automatic SIMM size detection
- maprom selectable by jumper
- optional Fast SCSI 2 DMA controller (
- 7 MB/s asynchronous, 10 MB/s synchronous transfer speed
- additional 72 pin SIMM socket accepts 128 MB RAM
- external DB25 female SCSI connector
- supported by Linux, NetBSD and OpenBSD
)
- notes
- can be disabled with a simple keystroke, including SCSI and RAM
- battery backed up clock
- incompatible with the Squirrel SCSI interface and with the Mikronik towers
front side
front side
front side
back side
- Blizzard1240.pdf
user manual (DCE, english)
92 kB - Blizzard1240-de.pdf
user manual (DCE, german)
89 kB - BlizzardSCSI4.pdf
SCSI Kit user manual (DCE, english)
128 kB - BlizzardSCSI4-de.pdf
SCSI Kit user manual (DCE, german)
129 kB
- P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB - blizzard1260.DMS
Installer's Heaven
install disk
582 kB - P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
(for driver versions before v7.x)
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Advert (DE)
1995-08
Advert (DE)
1996-05
Advert (DE)
1996-09
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A2000 | Interface CPU slot | Autoconfig ID 8512 / 24 |
- processor
- 68040 @ 40 MHz / 68060 @ 50 MHz
- the 68040s are recycled from used Macs
- memory
- four 72 pin SIMM sockets accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs, 70 ns or faster
- fully autoconfiguring
- maprom selectable by jumper
- Fast SCSI 2 DMA controller
- 7 MB/s asynchronous, 10 MB/s synchronous transfer speed
- 50 pin internal header
- 50 pin external connector
- supported by Linux, NetBSD and OpenBSD
- notes
- 68000 fallback mode selectable with a simple keystroke at startup - works only with rev. B A2000s
- Blizzard 2040 ERC boards with SN# A400001 - A400094 were delivered with a defective DiagROM
- the 68040 processor is recognized as 68LC040 or 68EC040
- boards with these serial numbers had to be sent back to Phase5 to obtain a new DiagROM set including a new SCSI driver
front side
back side
front side
front side
back side
back side
- Blizzard2060.pdf
DCE
user manual (DCE, english)
160 kB - Blizzard2060-de.pdf
user manual (DCE, german)
158 kB
- P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB - P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
(for driver versions before v7.x)
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Advert (DE)
1995-08
Advert (DE)
1996-05
Advert (DE)
1996-09
Company Phase 5 Digital Products, Germany | Date 1995 | Amiga A3000, A4000 | Interface CPU slot |
- processor
- 68030 @ 40 / 50 MHz PGA
- optional PGA FPU up to 68882 @ 50 MHz
- notes
- no memory option - but it has faster motherboard RAM access than that of the A3640
front side
back side
- Blizzard4030.pdf
User's Manual (german/english)
355 kB
Advert (DE)
1994-05
Advert (DE)
1995-04
Company Phase 5 Digital Products, Germany | Date 1992 | Amiga CDTV | Interface 68000 socket | Autoconfig ID 8512 / |
- 68000 @ 14 MHz, QFP
- 2 MB RAM
- sixteen 1M×1, 70 ns SOJ chips
- connects into the 68000 socket
- the board was never released
front side
back side
Company Phase 5 Digital Products, Germany | Date 1998 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 8512 / 110 |
- processor
- PowerPC 603e @ 160 / 200 / 240 MHz
- 68LC040 or 68040 @ 25 MHz or 68060 @ 50 MHz
- can be ordered without a 680x0 companion CPU to fit an existing one into the socket
- 50, 60 or 66 MHz PowerPC bus
- memory
- two 72 pin SIMM sockets accept 256 MB RAM
- supports 4, 8, 16, 32, 64, 128 MB, 60 or 70 ns SIMMs
- automatic SIMM size detection
- SIMM sizes can be mixed but must have the same access speed
- 32 bit RAM access - the 64 bit access mode of the 603e is not utilized
- notes
- 603e Plus has Fast SCSI2 controller (NCR 53C710)
- MiniDB50 internal, Centronics 50HD external SCSI connector
- expansion slot for the BlizzardVision PPC
- FlashROM for the PPC startup software
- can be disabled with a simple keystroke
- supported by Linux
front side
front side
back side
back side
- BlizzardPPC-de.pdf
user manual (german)
755 kB
- P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB
Company Phase 5 Digital Products, Germany | Date 1995 | Amiga A1200 |
- SCSI controller
- the optional Fast SCSI 2 DMA controller for the Blizzard 1230 III processor card
- Qlogic FAS408 controller IC
- external DB25 SCSI connector
front side
front side
back side
- 1230ScsiFix16.lha
Chris Hodges
SCSI slowdown fix
3 kB
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A1200 |
- SCSI controller
- the optional Fast SCSI 2 DMA controller for the Blizzard 1230 IV and Blizzard 1240/1260 processor cards
- Qlogic FAS216 controller IC
- 7 MB/s asynchronous, 10 MB/s synchronous transfer speed
- additional 72 pin SIMM socket accepts up to 128 MB RAM
- external DB25 female SCSI connector
- supported by Linux, NetBSD and OpenBSD
with cable, front side
front side
back side
front side
- BlizzardSCSI4.pdf
SCSI Kit user manual (DCE, english)
128 kB - BlizzardSCSI4-de.pdf
SCSI Kit user manual (DCE, german)
129 kB
- P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
(for driver versions before v7.x)
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Company Phase 5 Digital Products, Germany | Date 1992 | Amiga A500, A2000 | Interface 68000 socket | Autoconfig ID 8512 / 1,2 |
- processor
- 68000 @ 14 MHz
- memory
- sixteen DIP sockets accept 1, 2, 3, 4, 5, 6 or 8 MB RAM
- supports 256k×4 or 1M×4, 100 ns DIPs
- accepts DIPs in groups of four
- DIP sizes can be mixed
- Shadow RAM
- optional 512 kB SRAM for Kickstart remapping
- four DIP sockets for 256k×4 chips
- notes
- connects to the 68000's socket
- software switchable 7 MHz fallback mode
front side
front side
back side
- Blizzard.dms
install disk
41 kB
Advert (DE)
1992-10
Advert (DE)
1993-04
Advert (DE)
1993-06
Company Phase 5 Digital Products, Germany | Date 1998 | Amiga A1200 |
- RTG graphics card
- 3D Labs & Texas Instruments: Permedia 2
- 230 MHz RAMDAC
- 24 bit resolutions can be packed to achieve higher refresh rates and less memory usage but slows down graphics operations
- 145 MHz dot clock in 24 bit packed pixel modes
- 100 MHz in 32 bit modes
- 80 million textured 3D pixels per second
- hardware accelerated rendering functions: z-buffering, gouraud shading, fogging, blending, antialiasing
- support for color space conversion, chroma keying, XY scaling
- 25 MHz local PCI bus
- 8 MB 64 bit wide SGRAM
- screen modes
- programmable resolutions
- no support for interlace screen modes
- 1280×1024×24 non-interlace
- 1600×1200×16 non-interlace
- notes
- the CPU board requires a flash ROM update
- no support for draggable screens
- CyberGraphX 3 & 4.1 drivers
- 15 pin DSUB connector
- 4 pin 3D shutter glass connector
- a large hole gives access to the floppy power and LED cable headers on the motherboard but not the clock port
- no monitor switch
- supported by Linux
Phase 5 BlizzardVision PPC, front side
DCE BlizzardVision PPC, front side
DCE BlizzardVision PPC, back side
Phase 5 BlizzardVision PPC, back side
- BVisionPPC.pdf
user manual (english translation by Richard Donoghue)
374 kB
Company Phase 5 Digital Products, Germany | Date 1994,1995 | Amiga A4000 | Interface CPU slot | Autoconfig ID 8512 / 11,12 |
- processor
- 68040 @ 40 MHz (1994) or 68060 @ 50 MHz (1995)
- modular design
- carrier board
- holds the CPU-, memory-, SCSI- or I/O boards
- two ROM sockets for the motherboard ROMs
- CPU board
- holds the CPU and the optional 2nd level cache
- only this board has to be replaced in order to use an other CPU
- max. clock speed is 80 MHz
- memory board
- four 72 pin SIMM sockets can accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs
- burst RAM access
- mounted vertically on the carrier board
- optional 512 kB 2nd level cache module
- optional Fast SCSI 2 board
- FAS216 controller IC
- transfer speed: 7 MB/s asynchronous, 10 MB/s synchronous
- 50 pin internal header
- MiniDB50 external connector
- active bus termination
- SCSI Direct compatible
- supported by Linux and NetBSD
- optional I/O board
- Fast SCSI 2 with the same specs as above
- 10BaseT Ethernet port, 10 MB/s
- RS232 serial port, 2 MBaud/s
- notes
- may not work with the Retina Z3 graphics board
- cannot map the ROM into fast RAM
Assembled expansion, front side
Board with components, front side
CyberSCSI module, front side
Assembled expansion with CyberSCSI, front side
Assembled expansion with CyberSCSI, back side
- CS_Mk1.pdf
User's Manual (german/english)
1063 kB - CyberStorm_RAM_jumpers.pdf
RAM jumper settings (english)
23 kB - CyberStorm_SCSI_jumpers.pdf
SCSI module jumper settings (english)
51 kB
- CyberStorm1_060.dms
install disk v1.0.1
68040.library v40.2, 68060.library v40.305
CyberTools, Barfly
740 kB - P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB - P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
(for driver versions before v7.x)
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Advert (DE)
1995-04
Advert (DE)
1995-08
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A3000, A4000 | Interface CPU slot | Autoconfig ID 8512 / 25 |
- processor
- 68040 @ 40 MHz or 68060 @ 50 MHz
- the 68040s are recycled from used Macs
- the board is ready for 68060 @ 66 MHz
- memory
- four 72 pin SIMM sockets can accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs, 70 ns
- onboard logic maps any combinations of SIMMs into one contiguous block without the need of jumpers
- burst mode RAM access
- improved access to chip RAM using a write buffer
- RAM access is 70 ns even with 60 ns SIMMs
- optional Fast SCSI 2 module - CyberSCSI Mk2
- does not fit mechanically into a desktop A3000
- 32 bit DMA engine - FAS216
- max 10 MB/s transfer speed
- 50 pin internal header
- autoboot capability
- requires the INT2 signal which is not present in the A3000's CPU slot
- the module itself is not equipped with termination resistors; they are placed on a separate PCB which houses the external 50 pin micro-D SCSI connector
- this automatic resistor finds out on its own whether it is the last piece of equipment on the backbone and switches itself on if this is the case
- supported by Linux and NetBSD
- Flash ROM
- contains the updatable CyberStorm firmware
- needs update for the 66 MHz design
- needs update for installing the SCSI module
- notes
- CyberStorm 040 SN# B400506 - B400569 and CyberStorm 060 SN# B002827 - B003065 are affected by several DMA related problems due to a slight difference in the electrical specifications of certain parts caused by supplier change
- symptoms:
- SCSI units connected to the internal SCSI bus of the A3000(T) are not recognized while having RAM installed to the CyberStorm
- does not work in the A4000T with RAM installed on the CyberStorm
- in an A4000 with a Fastlane or a A4091 SCSI controller installed, peripherals connected to the SCSI bus are not recognized
- boards with these serial numbers had to be sent back to Phase5 for rework
040 version, front side
040 version, back side
060 version, front side
060 version, back side
060 version, back side
CyberSCSI Mk2, back side
- P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB - CyberStorm2-Tools-13.dms
tool disk v1.3
68040.library v40.2, 68060.library v40.353
599 kB - CyberStorm2-Develop-13.dms
development disk v1.3
Barfly v1.28 (Assembler Development System)
599 kB - csmkii060v1.3.DMS
Installer's Heaven
install disk v1.3
598 kB - P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
for driver versions before v7.x
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Advert (DE)
1996-05
Advert (DE)
1996-09
Company Phase 5 Digital Products, Germany | Date 1998 | Amiga A3000, A4000 | Interface CPU slot | Autoconfig ID 8512 / 100 |
- processor
- 68060 @ 50 MHz
- can be ordered with empty CPU socket to put an existing 68060 into it
- memory
- four 72 pin SIMM sockets accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs 60-70 ns
- 64 bit interleaved RAM access
- up to 68 MB/s transfer speed
- the Cyberstorm Mk3 is a bit picky about DRAM Chip Memory Array organization
- the card only has 11 address lines, thus only 2048×2048 organized DRAM Memory Arrays are supported
- 1024×4096 organized chips would need 12 address lines and are not working
- the Memory Array organization is given in the chip datasheet and not to be confused with the output bit configuration (e.g. 4M×4) of a DRAM chip
- if the chip has the wrong organization, only half of the RAM is recognised
- notes
- the board is the same as the CyberStorm PPC without the PPC components - not upgradeable to PPC
- Ultra Wide SCSI controller, NCR 53C770 - supported by NetBSD
- expansion slot for the CyberVision PPC
- the SCSI controller needs the INT2 signal which is not present in the A3000's CPU slot
front side
back side
Board with Memory, front side
- CyberStorm3.pdf
DCE
User Manual (german/english)
947 kB
- P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB - CS-SCSI-Tools-30.dms
SCSI tool disk v3.0
508 kB - CS-SCSI-Tools-31.dms
SCSI tool disk v3.1
UnitControl v2.17, SCSIConfig v1.27
540 kB
Company Phase 5 Digital Products, Germany | Date 1997 | Amiga A3000, A4000 | Interface CPU slot | Autoconfig ID 8512 / 100 |
- processor
- PowerPC 604e @ 150 / 180 / 200 / 233 MHz
- 68040 @ 25 MHz or 68060 @ 50 MHz
- can be ordered without a 680x0 companion CPU to put an existing one into the socket
- memory
- four 72 pin SIMM sockets accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs 60-70 ns
- 64 bit interleaved RAM access
- the Cyberstorm PPC is a bit picky about DRAM Chip Memory Array organization
- the card only has 11 address lines, thus only 2048×2048 organized DRAM Memory Arrays are supported
- 1024×4096 organized chips would need 12 address lines and are not working
- the Memory Array organization is given in the chip datasheet and not to be confused with the output bit configuration (e.g. 4M×4) of a DRAM chip
- if the chip has the wrong organization, only half of the RAM is recognised
- notes
- NCR 53C770 Ultra Wide SCSI controller - follows the Wide Fast 20 standard, supported by NetBSD
- expansion slot for the CyberVision PPC
- the SCSI controller needs the INT2 signal which is not present in the A3000's CPU slot
front side
back side
- CyberStormPPC-42.dms
install disk
68060.library v42.0 (11.09.1997), ppc.library v44.29Beta
540 kB - P5-SystemDisk-421.dms
install disk v2.0
68060.library v42.1 (14.10.1997), ppc.library v44.29Beta
297 kB - P5-SystemDisk-431.dms
install disk v2.0
68060.library v43.1 (05.02.1998), ppc.library 45.17Beta
353 kB - CS-SCSI-Tools-30.dms
SCSI tool disk v3.0
508 kB - CS-SCSI-Tools-31.dms
SCSI tool disk v3.1
UnitControl v2.17, SCSIConfig v1.27
540 kB
Company Phase 5 Digital Products, Germany | Date 1995 | Amiga A3000, A4000 | Interface Zorro III | Autoconfig ID 8512 / 34 |
- RTG graphics card
- S3 86C764 Trio64 (VL bus)
- 135 MHz dot clock in 8 bit modes
- 80 MHz @ 16 bit
- 50 MHz @ 24 bit
- 64 bit blitter
- 24 bit D/A converter
- extended support for line-draw, copy and fill operations
- Roxxler - planar to chunky converter chip
- 50 MHz VL bus - no need for PCI bridge - faster video memory access
- 2 or 4 MB 64 bit 70 ns DRAM
- 2 MB soldered to board
- four sockets for additional 2 MB
- screen modes
- programmable resolutions
- 1600×1200×8 non-interlace
- 1280×1024×16 non-interlace
- 1152×864×24 interlace
- 1024×768×24 non-interlace
- notes
- digital video expansion bus - for never developed JPEG, MPEG, DSP modules
- digital monitor switcher with video amplifiers
- video passthrough connector and cable
- HD15 VGA connector
- CyberGraphX 2, 3, 4 and Picasso96 drivers
- supported by Linux, NetBSD and OpenBSD
front side
back side
front side
- CyberVision64-214.dms
Install disk v2.14
cybergraphics.library v40.64, CyberView v2.3, CyberWindow v2.1, CVMode v1.5
443 kB - CyberVision64-215.dms
Install disk v2.15
cybergraphics.library v40.64, CyberView v2.3, CyberWindow v2.1, CVMode v1.5
442 kB - CyberVision64-216.dms
Install disk v2.16
cybergraphics.library v40.64, CyberView v2.3, CyberWindow v2.1
438 kB - CyberVision64-218.dms
Install disk v2.18
cybergraphics.library v40.89, CyberView v2.3, CyberWindow v2.1
440 kB - CV64-1.DMS
Installer's Heaven
install disk
448 kB - CV64-2.DMS
Installer's Heaven
install disk
424 kB
Advert (DE)
1995-04
Advert (DE)
1995-08
Advert (DE)
1996-05
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A2000A3000, A4000 | - - | Interface Zorro IIZorro III | Autoconfig ID 8512 / 678512 / 50 |
- RTG graphics card
- S3 ViRGE (PCI bus)
- 135 MHz dot clock in 8 bit modes
- 80 MHz @ 16 bit
- 50 MHz @ 24 bit
- 64 bit blitter
- complex 3D functions
- 25 MHz local PCI bus
- 4 MB 64 bit page mode DRAM, eight chips
- screen modes
- programmable resolutions
- 1600×1200×8 non interlace
- 1280×1024×16
- 1024×768×24
- optional modules
- monitor switch & scan doubler
- allows using one monitor for Amiga and CyberVision modes
- doubles native Amiga 15 kHz modes to 31 kHz
- connects to the video slot in one line with the CyberVision
- a small ribbon cable attaches the cards
- HD15 VGA connector
- MPEG decoder
- realtime MPEG audio and video decoding in full size or in a Workbench window
- dedicated line output jack
- notes
- Zorro II / III autosensing
- HD15 connector
- CyberGraphX 3, 4 and Picasso96 drivers
- supported by Linux and NetBSD
front side
front side
back side
- CyberVision643D.pdf
DCE
user manual (german/english)
194 kB
- CyberVision64_3D-30.dms
install disk v3.0
cgxsystem.library v41.9, CVision3D v2.10 (20.6.97)
525 kB - CyberVision64_3D-20.dms
install disk v2.0
cgxsystem.library 41.0beta20
CVision3D 2.0beta335 (22.12.96)
550 kB - CyberVision64_3D-21.dms
Install disk v2.1
cgxsystem.library v41.1, CVision3D v2.1 (3.2.97)
526 kB - CV3DInstall.lha
Aminet
install disk
1042 kB
Prototype
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A2000A3000, A4000 | - - | Interface Zorro IIZorro III | Autoconfig ID 8512 / |
- RTG graphics card
- S3 ViRGE (PCI bus)
- 25 MHz local PCI bus
- 4 MB 64 bit page mode DRAM, eight chips
- programmable resolutions
- Zorro II / III autosensing
- HD15 connector
front side
back side
front side
back side
Company Phase 5 Digital Products, Germany | Date 1998 | Amiga A3000, A4000 | Autoconfig ID 8512 / 68 |
- RTG graphics card
- 3D Labs & Texas Instruments: Permedia 2
- 230 MHz RAMDAC
- 24 bit resolutions can be packed to achieve higher refresh rates and less memory usage but slows down graphics operations
- 145 MHz dot clock in 24 bit packed pixel modes
- 100 MHz in 32 bit modes
- 80 million textured 3D pixels per second
- hardware accelerated rendering functions: z-buffering, gouraud shading, fogging, blending, antialiasing
- support for color space conversion, chroma keying, XY scaling
- 25 MHz local PCI bus
- 8 MB 64 bit wide SGRAM
- screen modes
- programmable resolutions
- no support for interlace screen modes
- 1280×1024×32 non-interlace
- 1600×1200×24 non-interlace
- notes
- rev 1.0 boards has only one edge connector for vertical mounting on the CPU board - it cannot be used with CyberStorm PPCs fitted in an A3000 because of the limited space
- rev 1.1 boards has two edge connectors for horizontal and vertical mounting
- the CPU board requires a flash ROM update
- a 10 pin shielded ribbon cable leads to the two external connectors
- 15 pin DSUB
- 3 pin mini DIN for use with an optional shutter glasses system (mounted only on rev 1.1 boards)
- no integrated passthrough option - an external monitor switch is required in order to use an existing scan doubler for the native screen modes
- no support for draggable screens
- CyberGraphX 3, 4 drivers
- supported by Linux
front side
front side
back side
back side
- CyberVisionPPC_SystemUpdate-444.dms
flash update
68060.library 44.4 (05.07.1998), ppc.library 46.18
276 kB
Company Phase 5 Digital Products, Germany | Date 1993 | Amiga A3000, A4000 | Interface Zorro III | Autoconfig ID 8512 / 10,11 |
- Fast SCSI 2 controller
- FAS216 controller IC
- DMA transfer is interrupt controlled and supported by a bi-directional 32 bit wide FIFO buffer
- 7 MB/s asynchronous and 10 MB/s synchronous transfer speed
- internal 50 pin SCSI port
- external 50 pin Centronics SCSI port
- active bus termination
- autoboot ROM (z3scsi.device)
- supported by Linux, NetBSD and OpenBSD
- memory
- sixteen 30 pin SIMM sockets accept 64 or 256 MB 60-100 ns RAM
- the 64 MB version supports only 1 or 4 MB SIMMs
- an upgrade kit allows using 16 MB SIMMs but no 1 MB SIMMs
- accepts SIMMs in groups of four of the same size
- notes
- works even with Buster rev. 09
- revision 2.2 boards require a patch to work with a Broadcaster Elite or Digital Broadcaster 32 video editing card
front side
front side
back side
back side
- Fastlane.pdf
user manual (german)
1550 kB - Fastlane_jumpers.pdf
jumper settings (english)
108 kB
- FastlaneZ3.dms
install disk
163 kB - P5-SCSI-Tools-13.dms
SCSI tool disk v1.3
(for driver versions before v7.x)
425 kB - P5-SCSI-Tools-20.lha
SCSI tool disk v2.0
222 kB - P5-SCSI-Tools-21.dms
SCSI tool disk v2.1
287 kB - P5-SCSI-Tools-22.dms
SCSI tool disk v2.2
520 kB - P5-SCSI-Tools-24.dms
SCSI tool disk v2.4
520 kB
Advert (DE)
1993-04
Advert (DE)
1993-06
Advert (DE)
1993-10
Advert (DE)
1994-05
Advert (DE)
1995-04
Prototype
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A4000 |
- PowerPC 603 or 604e
- 68040 @ 25 MHz or 68060 @ 50 MHz
- connects into the CyberStorm Mk2 680x0 processor socket
- covers the entire length of the host CyberStorm board
front side
front side
Company Phase 5 Digital Products, Germany | Date 1996 | Amiga A4000 |
- PowerPC 603e @ 150 MHz
- 68040 @ 25 MHz or 68060 @ 50 MHz
- connects into the CyberStorm Mk2 680x0 processor socket
- covers only half of the host CyberStorm
- the board was shipped to software developers before the release of CyberStorm PPC
- DB9 connector for developing
front side
front side
back side
Prototype
Company Phase 5 Digital Products, Germany | Date 1995 | Amiga A4000 | Interface CPU slot |
- PowerPC 604 @ 66 MHz
- 68030
- connects to the A4000 processor slot
- the board is unable to run Amiga OS, it's for diagnostic purposes only
front side
front side
front side
back side