Amiga Hardware DatabaseManufacturer Sunrize Industries, USA | Date 1986,1987,1988 | Amiga any Amiga | Interface parallel port |
- Sound Sampler
- small external sound sampler
- stereo sampling in 8 bit
- two RCA ports for plugging in a line level sound source
- sound editing and playback through the included software
- software revisions below v3.11 do not work with 020 and 030 processors
- hardware and software was developed by Anthony J. Wood
- plugs into parallel port
- Perfect Sound I
- white metal chassis
- female DB25 connector on the front, device mounts vertically to the Amiga
- volume and sound knob on front of the case
- only for A1000 (does not work on other Amigas even with a gender changer)
- Perfect Sound II
- white metal chassis
- plugs to standard parallel port
- higher sampling rate and onboard sample-and-hold circuitry (AD7575)
- Perfect Sound III
- up to 40 kHz sampling rate in mono
- early revisions feature a white metal chassis, later revisions a black plastic chassis with different design
- features an additional microphone input (3.5 mm jack) with preamplifier
- no volume knob - the volume is controlled by software, thus ruling out third party software which does not support this
Perfect Sound III board, front side
Perfect Sound III, front side
Perfect Sound III, rear side
Perfect Sound III, right side
Perfect Sound III, left side
- PerfectSound-30.dms
install disk v3.0
420 kB - PerfectSound-311.dms
install disk v3.11
406 kB
Advert (DE)
1991-10
Advert (DE)
1991-12
Advert (DE)
1990-11
Advert (US)
1987-01
Advert (FR)
1989-01
Advert (US)
1989-12
Advert (US)
1990-08
Advert (US)
1991-05
Advert (US)
1991-12