Amiga Hardware DatabaseManufacturer Elaborate Bytes / BSC, Germany | Date 1990 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2046 / 32049 / 3 2092 / 3 |
- SCSI 2 controller
- NCR 53C94 @ 25 MHz
- does not use DMA but interrupt driven programmed I/O
- 50 pin internal SCSI connector
- DB25 external SCSI connector for both snap-in and screw-in connectors
- place for a 3.5" hard disk on the card
- autoboot ROM - autobooting requires at least Kickstart 1.3
- RDB compatible
- two-ROM version (ALF 232C)
- designed by Elaborate Bytes
- after developing this card, Elaborate Bytes sold their entire hardware product range to BSC
- jumper settings:
| Jumper | Configuration | Setting |
| J1 | Kickstart | ON - Kickstart 1.2, OFF - Kickstart >= 1.3 |
| J2 | Deactivation | Disable Controller |
| J3-J5 | SCSI ID | Set SCSI ID ON ON ON - 0 ON ON OFF - 1 ... OFF OFF OFF - 7 |
| J6 | Parity | ON - No Parity Check, OFF - Parity Check |
| J7 | LUN | ON - No LUN Control, OFF - LUN Control |
| J8 | Disconnect/Reconnect | ON - No Disconnect/Reconnect allowed, OFF - Disconnect/Reconnect allowed |
| J9, J10 | Login Screen | ON ON - Login Screen disabled ON OFF - Login Screen by pressing F1 OFF ON - Login Screen after every reset OFF OFF - Login Screen when no password is set (power up) or by pressing F1 |
| J11 | Interrupt | ON - INT2, OFF - INT6 |
| J12 | Reset Level | ON - Delete all control registers upon reset (test purposes) |
| J13 | Bus Termination | ON - 5V on Termination Power Line |
- one-ROM version (Oktagon 2000)
- designed by BSC
- an Oktagon 2008 without RAM expansion
BSC A.L.F. 3, front side
BSC A.L.F. 3, back side
Elaborate Bytes ALF 232C, front side
Elaborate Bytes ALF 232C, back side
BSC A.L.F. 3 (Oktagon 2000), front side
BSC A.L.F. 3 (Oktagon 2000), back side
- oktapus.lha
Aminet
OktaPussy v2.1 (24.11.98)
106 kB
Advert (DE)
1990-11
Advert (DE)
1991-03