Manufacturer “Mainhattan Data”
5 expansions in database
 
			Manufacturer Mainhattan Data, Germany                  | Date 1992 | Amiga A2000, A3000, A4000
  | Interface Zorro II
  | Autoconfig ID 2159 / 1
  | 
		
		
 IDE controller
  - autobootROM - autobooting requires at least Kickstart 1.3
  
 - RDB compatible
  
 - 40 pin internal IDE header
  
 - autoboot disable jumper
  
 - available as filecard or slotcard
  
   - filecard: full length card with place for a 3.5" hard disk on the card
   
 - slotcard: half length card, no place for mounting a hard disk
  
 
  
 					
 front side 	
 back side  
						- A-Team1.dms
install disk v1.0 
692 kB  - A-Team2.dms
install disk v2.1 (25.5.1992)
ateam.device v1.7 (19.05.1992) 
668 kB  - A-Team2-18.dms
install disk v2.1 (14.7.1992)
ateam.device v1.8 (03.06.1992) 
662 kB 			 
  
			
Advert (DE)
1992-10 
  			Manufacturer Mainhattan Data, Germany                  | Date 1992 | Amiga A500
  | Interface side expansion port
  | Autoconfig ID 2159 / 1
  | 
		
		
 IDE controller
  - autobootROM - autobooting requires at least Kickstart 1.3
  
 - RDB compatible
  
 - 40 pin internal IDE header
  
 - autoboot disable jumper
  
 - connects to the side expansion port, no passthrough connector
 
 
 					
 front side 	
 back side  
						- A-Team1.dms
install disk v1.0 
692 kB  - A-Team2.dms
install disk v2.1 (25.5.1992)
ateam.device v1.7 (19.05.1992) 
668 kB  - A-Team2-18.dms
install disk v2.1 (14.7.1992)
ateam.device v1.8 (03.06.1992) 
662 kB 			 
  
  	 audio amplifier
  - 2× RCA connector for stereo input
  
 - 2 connectors for a pair of passive loudspeakers
 
  - standard version has 2×12W, high power version 2×25W
 
  - supplied software allows basic sound control for each input: volume, balance, bass, treble
 
  - advanced sound effects like reverb can also be applied to the sound signal
 
 
 					
 front side 	
 back side  
  			Manufacturer Mainhattan Data, Germany                  | Date 1991 | Amiga A500, A2000
  | Interface Kickstart socket
  | 		
		
Kickstart Switcher
 - expansion switches between a RAM-stored Kickstart and the Kickstart in ROM
 
 - 512 kB RAM allows storing a Kickstart ≥v2.0
 
 - 4 SRAM sockets
 
 - compatible with 128K × 8 bit SRAM chips
 
 - expansion plugs into Kickstart ROM socket, the ROM chip is installed on the board
 
 - an additional adapter PCB has to be connected to CPU socket, the CPU is replaced onto the adapter board
 
 - expansion features a battery to maintain the RAM content
 
 - selector switch to select either of the two Kickstarts, and enable the write mode
 
 - delivered with True-Kick software, needed to write the Kickstart image
 
 	
			
Advert (DE)
1991-09
Advert (DE)
1992-02 
   			Manufacturer Mainhattan Data, Germany                  | Date 1993 | Amiga any Amiga
  | Interface parallel port
  | 		
		
 SCSI adapter
  - converts the parallel port signals to SCSI signals
  
 - a 5×4×1 cm box
  
 - connects to the parallel port and provides a DB25 SCSI connector - the parallel port is not passed through
  
 - some versions get power from the RGB port, others from the mouse/game port - in both cases the port is passed through
  
 - very slow - the parallel port limits the data transfer
  
 - can reboot, but cannot autoboot
  
 - RDB compatible
  
 - compatible with the A2088XT and A2286AT with BridgeBoard software from or after 23.11.88.
 
 
 					
Case, top side 	
Board, front side 	
Board, back side  
		
			
Advert (DE)
1994-06