Manufacturer “Ingenieurbüro Helfrich”
6 expansions in database
Manufacturer
Ingenieurbüro Helfrich, Germany
Date
1992
Amiga
A2000, A3000, A4000
Interface
Zorro II
Autoconfig ID
2195 /
    MPEG video decoder
  • C-Cube CL450 video decoder
    • plays MPEG 1 animations at 25 fps in 352×288×24 (PAL), 352×240×24 (NTSC)
  • cannot decode MPEG audio
  • video can be played directly from CD-ROM (VideoCD, Philips CDI) or from hard disk
  • the video output is synchronized to the Amiga (NTSC/PAL) display
  • works only if the Amiga produces an NTSC/PAL signal
  • 256 kB display buffer
  • HD15 video output connector (RGB)
  • HD15 video passthrough connctor
Ingenieurbüro Helfrich Peggy -  front side
front side

Manufacturer
Ingenieurbüro Helfrich, Germany
Date
1993
Amiga
A2000, A3000, A4000
Interface
Zorro II, video slot
Autoconfig ID
2195 / 7
    MPEG video decoder
  • C-Cube CL450 video decoder
    • plays MPEG 1 animations at 25 fps in 352×288×24 (PAL), 352×240×24 (NTSC)
  • LSI-Logic L64112 audio decoder
    • supports MPEG-1 audio Layer 1 and 2
  • video can be played directly from CD-ROM (VideoCD, Philips CDI) or from hard disk
  • the video output is synchronized to the Amiga (NTSC/PAL) display
  • the Amiga signal can be used as overlay via the built in genlock
  • works only if the Amiga produces an NTSC/PAL signal
  • the Amiga audio output can be mixed into the MPEG audio output
  • 512 kB display buffer, expandable to 1 MB
  • HD15 video connector (RGB output)
  • 16 bit stereo audio output (headphone jack)
  • optional video module with composite and Y/C outputs
  • the card's device driver (peggympeg.device) is somewhat compatible with the CD32 device driver (mpeg.device)
Ingenieurbüro Helfrich Peggy Plus (Scala MD100) - without video encoder front side
without video encoder, front side
Ingenieurbüro Helfrich Peggy Plus (Scala MD100) -  back side
back side
Ingenieurbüro Helfrich Peggy Plus (Scala MD100) - with video encoder front side
with video encoder, front side
Ingenieurbüro Helfrich Peggy Plus (Scala MD100) - with video encoder back side
with video encoder, back side
Ingenieurbüro Helfrich Peggy Plus (Scala MD100) -  front side
front side
  • PeggyPlus.pdf
    Bedienungsanleitung / User Manual (german)
    1113 kB

Manufacturer
Ingenieurbüro Helfrich, Germany
Date
1993
Amiga
A2000
A3000, A4000

-
-
Interface
Zorro II
Zorro III
Autoconfig ID
2195 / 5,6
    RTG graphics card
  • Cirrus Logic GD5426
    • 85 MHz in 8 bit modes
    • 45 MHz in 16 bit
    • 28 MHz in 24 bit
  • 1 or 2 MB DRAM
    screen modes
  • 1600×1280×8 interlace
  • 1152×864×16 interlace
  • 800×600×24 non-interlace
    notes
  • Zorro II / III autosensing
  • automatic passthrough
  • two 15 pin DSUB connectors
  • S-VHS and FBAS connectors for the optional video encoder module
  • early boards may have problems with GVP Combo cards - the memory / bus controller has to be replaced on the Piccolo
  • feature connector for connecting the VideoCruncher digitizer card
  • Picasso96, CyberGraphX 2, 3, 4, EGS and custom drivers
  • supported by Linux, NetBSD and OpenBSD
Ingenieurbüro Helfrich Piccolo -  front side
front side
Ingenieurbüro Helfrich Piccolo -  back side
back side
Ingenieurbüro Helfrich Piccolo - Piccolo video module  front side
Piccolo video module, front side
Ingenieurbüro Helfrich Piccolo - Piccolo video module  back side
Piccolo video module, back side
Ingenieurbüro Helfrich Piccolo -  front side
front side
Ingenieurbüro Helfrich Piccolo -  front side
front side
Ingenieurbüro Helfrich Piccolo - connectors right side
connectors, right side
  • Piccolo-1.dms
    install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 1
    EGSAmigaDriver v6.011, egs.library v6.100

    357 kB
  • Piccolo-2.dms
    install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 2
    EGSAmigaDriver v6.011, egs.library v6.100

    769 kB
  • Piccolo-3.dms
    install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 3
    EGSAmigaDriver v6.011, egs.library v6.100

    776 kB
  • piccolo_1of3.dms
    Installer's Heaven
    install disk 1
    739 kB
  • piccolo_2of3.dms
    Installer's Heaven
    install disk 2
    424 kB
  • piccolo_3of3.dms
    Installer's Heaven
    install disk 3
    314 kB

Advert (US)
1993-11

Advert (DE)
1993-10

Advert (DE)
1993-10

Manufacturer
Ingenieurbüro Helfrich, Germany
Date
1995
Amiga
A2000
A3000, A4000

-
-
Interface
Zorro II
Zorro III
Autoconfig ID
2195 / 10,11
    RTG graphics card
  • Cirrus Logic GD5434
    • 64 bit blitter
    • 110 or 135 MHz in 8 bit modes
    • 85 MHz in 16 bit modes
    • 45 MHz in 24 bit modes
  • 2 or 4 MB 64 bit 70 ns DRAM
    • 2 MB (four chips) soldered to board
    • four sockets for additional 2 MB
    screen modes
  • 1600×1280×8 interlace
  • 1280×1024×16 interlace
  • 1024×768×24 interlace
    notes
  • Zorro II / III autosensing
  • Picasso96, CyberGraphX 2, 3, 4 and EGS drivers
  • supported by Linux and NetBSD
Ingenieurbüro Helfrich Piccolo SD64 -  front side
front side
Ingenieurbüro Helfrich Piccolo SD64 -  back side
back side
Ingenieurbüro Helfrich Piccolo SD64 - Piccolo video module  front side
Piccolo video module, front side
Ingenieurbüro Helfrich Piccolo SD64 - Piccolo video module  back side
Piccolo video module, back side
  • PiccoloSD64-1.dms
    install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 1
    EGSAmigaDriver v7.001, EGSPiccoloSD64Driver v7.028, egs.library v7.008

    465 kB
  • PiccoloSD64-2.dms
    install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 2
    EGSAmigaDriver v7.001, EGSPiccoloSD64Driver v7.028, egs.library v7.008

    803 kB
  • PiccoloSD64-3.dms
    install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 3
    EGSAmigaDriver v7.001, EGSPiccoloSD64Driver v7.028, egs.library v7.008

    777 kB

Advert (DE)
1995-06

Manufacturer
Ingenieurbüro Helfrich, Germany
Date
1994
Amiga
A3000, A4000
Interface
Zorro III
Autoconfig ID
2145 / 33
    RTG graphics card
  • most cards have an Inmos G360 with 110 MHz pixel clock
  • a few have G364-10S (100 MHz dot clock) or G365 CLT-RAMDAC (175 MHz dot clock)
  • 128 bit pixelbus
  • 4 MB, 20 ns, dualported VRAM in 32 ZIP sockets
  • video memory is linearly mapped into the Zorro III address space
  • hardware panning for processing oversized images
  • interrupt during the vertical blank (for cursor- and double buffering manipulations)
  • supports multiple screens and double buffering
    screen modes
  • 1600×1280×16 interlaced
  • 640×480×24
    notes
  • 64×64 hardware cursor with 3 colours
  • CyberGraphX 4.2 and EGS drivers
Ingenieurbüro Helfrich Rainbow III -  front side
front side

Manufacturer
Ingenieurbüro Helfrich, Germany
Date
1994
Amiga
A2000
A3000, A4000

-
-
Interface
Zorro II
Zorro III
Autoconfig ID
2195 / 8
    realtime digitizer
  • a video expansion card for the Piccolo graphics card
  • connects to the Piccolo via a ribbon cable
  • realtime JPEG compression / decompression chipset
  • captures video in motion JPEG format
  • realtime video capture (50 fields or 25 fps) and playback at YUV 4:2:2 square pixel quality
  • 768×576 maximum resolution for still images
  • 468×352 maximum resolution for video
  • 16 ZIP sockets for 2 MB frame buffer VRAM
  • Composite and Y/C inputs
  • Composite, Y/C and analogue RGB outputs
  • Zorro II / III autosensing
  • the card works without the Piccolo but some features are not available:
    • no PIP (Picture In Picture)
    • only the RGB output is active
  • Videocruncher Lite does not support PIP at all and has a maximum resolution of 384×288 only
Ingenieurbüro Helfrich VideoCruncher & VideoCruncher Lite -  front side
front side
Ingenieurbüro Helfrich VideoCruncher & VideoCruncher Lite -  back side
back side