Amiga Hardware DatabaseCompany DKB, USA | Date 1996 | Amiga A2000 | Interface CPU slot | Autoconfig ID 2012 / 23,255 |
- processor
- 68060 @ 50 MHz
- memory
- four 72 pin SIMM sockets accept 128 MB RAM
- supports 4, 8, 16, 32 MB SIMMs, 60-80 ns
- 64 bit interleaved RAM access if identical SIMMs are installed in alternate banks (U312 / U314 and U313 / U315)
- only SIMMs with 1K refresh rate are supported (SIMMs with 4K refresh rate don't work)
- Fast SCSI 2 controller
- 10 MB/s max transfer speed
- 50 pin internal header
- 50 pin external high density connector
- uses wildfirescsi.device
- Ethernet
- DEC Tulip 21040, the only Ethernet controller in Amigas that DMAs directly into fast 32 bit memory
- up to 100 Mb/s transfer speed
- 10Base-T connector
- internal slot for the optional 10Base-2 connector
- has SANA II, but no MNI driver
- notes
- works only with Kickstart 3.x
- flash ROM for firmware upgrades
- two PCI bus slots (one for the Inferno graphics board)
- JP104 jumper setting: ON = 70 or 80ns / OFF = 60ns (all other jumpers are reserved)
- configuration screen can be activated by holding right mouse button during startup
front side
back side
- Wildfire.pdf
user manual
334 kB
- WildFire.dms
install disk
328 kB
Advert (US)
1995-08
Advert (US)
1995-11