Vector Connection
Manufacturer
HK-Computer, Germany
Date
1994
Amiga
A2000, A3000, A4000
Interface
Zorro II
Autoconfig ID
2113 / 227
    serial and parallel interface
  • up to two bidirectional parallel ports
  • up to four serial ports - one 25 pin and three 9 pin ports
    revision below 2.7
  • max 57600 bps transfer speed
  • each two ports must be used at the same transfer speed when using rates above 19200 bps (below mixing is possible)
  • guaranteed transfer rates: 38400 bps on 68000, 57600 on 68020
  • hardware bug: lines for DSR and CD are switched on port SER3 - this is corrected by software
    revision 2.7 or above
  • max 115200 bps transfer speed (replacing an oscillator is necessary)
  • each two ports must be used at the same transfer speed when using rates above 57600 bps (below mixing is possible)
  • needs at least driver software v1.3
    notes
  • serial drivers / buffers are socketed
  • if a serial driver is destroyed by overcharge replacing the appropriate 1488 and 1489 chip solves the problem
  • driver software v2.0 or above requires Kickstart 2.04
  • MIDI compatible
Photos
HK-Computer Vector Connection - front side
front side
HK-Computer Vector Connection - back side
back side
HK-Computer Vector Connection - front side
front side
HK-Computer Vector Connection - back side
back side
Manual
Driver / Installation Disk