Amiga Hardware DatabaseCompany Roctec, Hong Kong | Date 1992 | Amiga A500 | Interface side expansion port | Autoconfig ID 2144 / 1,2 |
- IDE controller
- place for a 3.5" hard disk inside the case
- 40 pin internal IDE header
- does not support removable media drives
- autoboot ROM (rtidedisk.device)
- although RDB compatible, it cannot recognize hard disks formatted by other controllers
- hard disk activity LED
- optional SCSI controller
- NCR 53C400 controller IC
- DB25 external SCSI connector
- does not support RDB
- does not support SCSI-Direct
- memory
- eight 30 pin SIMM sockets accept up to 8 MB RAM
- accepts 1 MB, 120 ns or faster SIMMs only
- supports 2, 4 or 8 MB configurations
- memory is always mounted at $200000 (no autoconfig) - may have problems with other expansions
- notes
- connects to the side expansion port, no passthrough
- external power supply
- jumper and switch switch settings
- DIP switch
1 - hard disk: ON - enable 2 - memory: ON - enable 3 - autobooting: OFF - enable (for Kickstart 1.3 and above) 4-5 - reserved 6-8 - SCSI ID - game switch
0 - hard disk and memory disabled I - hard disk disabled II - hard disk and memory enabled - jumper
JPA1
1
2
3- memory
- 0 or 2 MB
- 4 MB
- 8 MB
PCB, front side
Exterior, left side
PCB, back side
- RocHard_RH800C.pdf
user manual
1589 kB
- RocHard.dms
install disk
294 kB
Advert (DE)
1991-10
Advert (US)
1992-01