Manufacturer
Kupke, Germany
Date
1991
Amiga
A500
Interface
side expansion port
Autoconfig ID
2073 / 4
    processor
  • 68030 @ 14 MHz, PGA (synchronous with the A500)
  • optional PGA FPU - it can run at 14 MHz, or use a separate crystal
    memory
  • 32 DIP sockets accept up to 16 MB RAM
  • supports 256k×4 or 1M×4 chips
  • accepts chips in groups of eight
  • possible memory configurations are 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 13 or 16 MB
    notes
  • connects to the side expansion port
  • passthrough connector for other side peripherals
  • conflicts with the A590 SCSI controller
  • disable switch on top of the case
    jumper settings
    JumperDefaultDescription
    JP101-FPU Oscillator: 1-2 - no oscillator present, 2-3 - oscillator present
    JP201OFFMMU Disable: ON - MMU disabled, OFF - MMU enabled
    JP202OFFCPU Cache Disable: ON - Cache disabled, OFF - Cache enabled
    JP302ONCache Chip Memory: ON - caching disabled, OFF - caching enabled
    JP303-1MBit/4MBit: ON - 1MBit, OFF - 4 MBit
    JP304-reserved
    JP305-reserved
Kupke Golem 030 Turbo (A500) - Exterior top side
Exterior, top side
Kupke Golem 030 Turbo (A500) - Board front side
Board, front side
Kupke Golem 030 Turbo (A500) - Board back side
Board, back side

Advert (DE)
1993-11