Amiga Hardware DatabaseManufacturer Expansion Systems / BSC, USA | Date 1992 | Amiga A500 | Interface side expansion port | Autoconfig ID 8290 / 1,2 |
- SCSI and IDE controller
- unlike the DataFlyer 500 (not Express), this unit does not use the DataFlyer 2000 and DataFlyer RAM Zorro II cards, but a single custom designed circuit board
- 40 pin internal IDE header
- 50 pin internal SCSI header
- DB25 external SCSI connector
- place for a 3.5" hard disk inside the case
- hard disk activity LED on top of the case
- autoboot ROM, autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
- autobooting can be also disabled by holding down the left mouse button during the boot sequence
- RDB compatible
- A-Max II driver
- memory
- eight 30 pin SIMM sockets accept up to 8 MB RAM
- supports 256 kB and 1 MB SIMMs
- possible configurations are 0.5, 1, 2, 4 and 8 MB
- SIMM sizes cannot be mixed
- notes
- connects to the side expansion connector, no passthrough connector
- can use power from the A500 or from the optional external power supply
Advert (US)
1992-06