DataFlyer Plus
Manufacturer
Expansion Systems, USA
Date
1991
Amiga
A2000, A3000, A4000
Interface
Zorro II
    SCSI and/or IDE controller
  • three versions, all share the same board with the necessary parts installed only
  • DataFlyer 2000 SCSI (2000s):
    • AMD 5380 SCSI controller
    • 50 pin internal SCSI header
    • optional external DB25 connector
  • DataFlyer 2000 IDE (2000e):
    • 40 pin internal IDE header
  • DataFlyer 2000 SCSI+IDE has all the parts installed
  • half length card with optional hard frame
  • place for a 3.5" hard disk either on the back of the card or on the optional hard frame
  • hard disk power connector
  • hard disk activity LED connector, individual for SCSI and IDE
  • expansion header for the optional DataFlyer RAM board
  • autoboot ROM (ExpSys.device) - autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
  • autobooting can be also disabled by holding down the left mouse button during the boot sequence
  • RDB compatible
  • A-Max II driver (ExpSys.amhd)
Photos
Expansion Systems DataFlyer Plus - IDE version front side
IDE version, front side
Expansion Systems DataFlyer Plus - IDE version back side
IDE version, back side
Expansion Systems DataFlyer Plus - SCSI version front side
SCSI version, front side
Expansion Systems DataFlyer Plus - SCSI and IDE version front side
SCSI and IDE version, front side
Expansion Systems DataFlyer Plus - SCSI and IDE version front side
SCSI and IDE version, front side
Driver / Installation Disk