DataFlyer 1000
Company
Expansion Systems, USA
Date
1991
Amiga
A1000
Interface
side expansion port
    SCSI or IDE controller
  • the case contains a standard Zorro II DataFlyer 2000 SCSI or IDE controller card and optionally a DataFlyer RAM board
  • place for a 3.5" HD inside the case, underneath the two Zorro II cards
  • connects to the side expansion port - no passthrough connector
  • DataFlyer 1000 SCSI:
    • AMD 5380 SCSI controller
    • 50 pin internal SCSI header
    • optional external DB25 connector
  • DataFlyer 1000 IDE:
    • 40 pin internal IDE header
  • hard disk activity LED on front of the case
  • optional internal power supply:
    • mounts inside the DataFlyer 1000 case
    • provides power for the controller card, memory card and the hard disk
    • turns on automatically when the A1000 is powered up
    • automatically senses all international input voltages
  • optional external power supply
    • powers the memory card only
    • has to be turned on manually before the A1000 is powered up
    • separate versions for different international input voltages
  • the unit can also take power from the A1000 without using an additional power supply
  • autoboot ROM (ExpSys.device) - autobooting requires at least Kickstart 1.3, otherwise it has be disabled with a jumper
  • autobooting can be also disabled by holding down the left mouse button during the boot sequence
  • RDB compatible
  • A-Max II driver (ExpSys.amhd)
Photos
Expansion Systems DataFlyer 1000 - front side
front side
Expansion Systems DataFlyer 1000 - front side
front side
Expansion Systems DataFlyer 1000 - back side
back side
Expansion Systems DataFlyer 1000 - left side
left side
Expansion Systems DataFlyer 1000 - inside side
inside side
Manual
Vintage Advert

Advert (US)
1992-02