Amiga Hardware DatabaseCompany Phase 5 Digital Products, Germany | Date 1998 | Amiga A3000, A4000 | Autoconfig ID 8512 / 68 |
- RTG graphics card
- 3D Labs & Texas Instruments: Permedia 2
- 230 MHz RAMDAC
- 24 bit resolutions can be packed to achieve higher refresh rates and less memory usage but slows down graphics operations
- 145 MHz dot clock in 24 bit packed pixel modes
- 100 MHz in 32 bit modes
- 80 million textured 3D pixels per second
- hardware accelerated rendering functions: z-buffering, gouraud shading, fogging, blending, antialiasing
- support for color space conversion, chroma keying, XY scaling
- 25 MHz local PCI bus
- 8 MB 64 bit wide SGRAM
- screen modes
- programmable resolutions
- no support for interlace screen modes
- 1280×1024×32 non-interlace
- 1600×1200×24 non-interlace
- notes
- rev 1.0 boards has only one edge connector for vertical mounting on the CPU board - it cannot be used with CyberStorm PPCs fitted in an A3000 because of the limited space
- rev 1.1 boards has two edge connectors for horizontal and vertical mounting
- the CPU board requires a flash ROM update
- a 10 pin shielded ribbon cable leads to the two external connectors
- 15 pin DSUB
- 3 pin mini DIN for use with an optional shutter glasses system (mounted only on rev 1.1 boards)
- no integrated passthrough option - an external monitor switch is required in order to use an existing scan doubler for the native screen modes
- no support for draggable screens
- CyberGraphX 3, 4 drivers
- supported by Linux
front side
front side
back side
back side
- CyberVisionPPC_SystemUpdate-444.dms
flash update
68060.library 44.4 (05.07.1998), ppc.library 46.18
276 kB