Amiga Hardware DatabaseManufacturer 3-State, Germany | Date 1992 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 8738 / 0,34 |
- SCSI 2 and IDE controller
- uses polled I/O instead of DMA transfer
- autoboot ROM (SCSI-Apollo.device) - autobooting requires at least Kickstart 1.3
- support for Rigid Disk Block
- Direct SCSI is supported only on the SCSI part of the controller
- place for a 3.5" hard disk on the card
- internal 50 pin SCSI header and 40 pin IDE header
- external DB25 SCSI connector
- hard disk activity LED
- disable switch
- memory
- sixteen ZIP sockets accept 8 MB RAM
- supports 1M×4 FastPage or Static Column ZIPs
- accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB RAM
- two 30 pin SIP sockets accept 2 MB RAM
- the SIP sockets are hardwired to the first bank of ZIP sockets, they cannot be used at the same time
front side
back side
- Apollo2000.pdf
User Manual
4.3 MB
- ApolloInstall-50.dms
install disk v5.0
197 kB - apollo.2030hdinstall.DMS
Installer's Heaven
install disk
197 kB
Advert (DE)
1992-08
Advert (DE)
1993-01