Search Result
7 expansions found
Manufacturer ASDG, USA | Date 1986 | Amiga A1000 A2000, A3000, A4000
| - - | Interface Zorro I Zorro II
| Autoconfig ID 1023 / 1
|
- 64 DIP sockets accept up to 2 MB RAM
- supports 0.5, 1 or 2 MB configurations
- uses 256k×1 DIPs, 150 ns
- zero wait states
- recoverable RAM disk (rrd.device)
- the Zorro I version (2M) fits into any Zorro I expansion chassis, such as ASDG's Mini-Rack
- the Zorro II version (2MI) was licensed to Micron Technology
Advert (US)
1986-08
Advert (US)
1987-02
Manufacturer ASDG, USA | Date 1987 | Amiga A1000 A2000, A3000, A4000
| - - | Interface Zorro I Zorro II
| Autoconfig ID 1023 / 2
|
- 64 DIP sockets accept up to 8 MB RAM
- accepts DIPs in groups of 16 giving 2, 4, 6 or 8 MB RAM
- AutoConfig does not support 6 MB configurations, so it is represented as two cards (2 + 4 MB)
- uses 1M×1 (411000) DIPs
- no waitstates
- memory autoconfig
- recoverable RAM disk (rrd.device)
- the Zorro I version (8M) fits into any Zorro I expansion chassis, such as ASDG's Mini-Rack
- the Zorro II version (8MI) was licensed to Progressive Peripherals
front side
back side
Advert (US)
1987-03
Advert (CA)
1988-12
Manufacturer Micro Forge, USA | Date 1986 | Amiga A1000
| Interface Zorro I
|
Advert (US)
1986-07
- 2 MB RAM in 64 DIP sockets
- 256k×1 DIPs
- connects to the Escort 2 Zorro I expansion chassis
DIP switch settings
1 OFF OFF ON ON |
2 OFF ON OFF ON |
- 2 MB - 1 MB - reserved - 512 kB |
front side
back side
Manufacturer Byte by Byte, USA | Date 1987 | Amiga A1000
| Interface Zorro I
|
- an optional memory card for the PAL & PAL Jr expansion boxes
- eight 30 pin SIMM sockets for up to 8 MB RAM
- does not conflict with the onboard 1 MB RAM
- accepts 256 kB or 1 MB SIMMs in pairs
- supported configurations are 0.5, 1, 1.5, 2, 4 or 8 MB
- autoconfiguring
Advert PAL Jr. (US)
1987-05
Advert PAL Jr. (US)
1987-07
Manufacturer Micro Forge, USA | Date 1986 | Amiga A1000
| Interface side expansion port Zorro I
|
SASI controller
- the controller is a custom 86 pin card housed in a single slot expansion box
- connects to the side expansion port, no passthrough connector
- uses an ST-506 hard disk drive with an OMTI 5100 SASI to ST-506 adaptor card
- delivered with a power supply for the hard disk
- does not autoboot
- does not support the RDB standard
- also available as card-only expansion without a case, to be used in the 7 Slot Expansion System or 1 Slot Expansion System
Advert (US)
1986-07
Manufacturer Micro Forge, USA | Date 1986 | Amiga A1000
| Interface Zorro I
|
Sound Sampler
- internal stereo sound sampler
- two input connectors for line level audio
- male 86 pin card connector
- intended to be used in the 7 Slot Expansion System or 1 Slot Expansion System
- software allows sampling in mono and stereo
- variable sampling rates
Advert (US)
1986-07