Amiga Hardware DatabaseSearch Result
5 expansions found
Manufacturer Individual Computers, Germany | Date 1997 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 4626 / 42 |
- combination of the Catweasel floppy controller and the Buddha IDE controller built into one device
- features all Buddha functions plus an additional IDE port for up to six IDE devices
- features all Catweasel functions plus a boot ROM which allows booting from floppy drives attached to it
- three 40 pin IDE headers
- 34 pin floppy header
- 26 pin local expansion slot for the optional HyperCom 3 Plus I/O module with two serial and one parallel ports
- not guaranteed to work with A1200 Zorro busboards - Winner Z4 board works properly, RMB boards fail
- supplied with the software packages of Buddha and Catweasel
- supported by Linux
front side
back side
- cwdisk0100.lha
Individual Computers
install disk
multidisk.device v3.48
361 kB - mdisk362.lha
Individual Computers
multidisk.device v3.62
22 kB
Manufacturer Individual Computers, Germany | Date 1998 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 4626 / 42 |
- combination of the Catweasel Mk2 floppy controller and the Buddha Flash IDE controller built into one device
- features all Buddha Flash and Catweasel Z-II Mk2 functions
- works with all A1200 Zorro busboards
front side
back side
- cwdisk0100.lha
Individual Computers
install disk
multidisk.device v3.48
361 kB - mdisk362.lha
Individual Computers
multidisk.device v3.62
22 kB
Manufacturer Individual Computers, Germany | Date 1997 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 4626 / 42 |
- combination of the Catweasel Mk2 floppy controller and the Buddha IDE controller built into one device
- uses the non-Zorro Catweasel Mk2 as a piggyback module
- features all Catweasel Z-II and Catweasel Mk2 functions
- each IDE port has its own activity LED connector
without Catweasel board, front side
Catweasel board, back side
with Catweasel board installed, front side
front side
- cwdisk0100.lha
Individual Computers
install disk
multidisk.device v3.48
361 kB - mdisk362.lha
Individual Computers
multidisk.device v3.62
22 kB
Manufacturer MicroniK, Germany | Date 1998 | Amiga A1200 | Interface trapdoor slot |
- Micronik Z-1i (6860 rev5.4)
- 5× Zorro II slots
- 1× extended video slot
- 2× PCI slots
- 2× ISA slots
- Micronik Z-2i (6860 rev5.4)
- all features of Micronik Z-1i
- two 72 pin SIMM sockets for up to 8 MB RAM
- notes
- the ISA and video slots are inline with Zorro slots
- the PCI slots cannot be accessed by the Amiga in any way
- the video slot can be activated with the optional Video Slot Adapter
- connects to the trapdoor slot - the connector is passed through for accelerator cards
- the boards are part of the Micronik Infinitiv tower system
- 2× 5.25" external drive bays
- 2× 3.5" external drive bays
- 2× 3.5" internal drive bays
- uprated power supply
front side
- MicronikA1200_Z1i_Z2i_Z-3i_Jumpers.pdf
Jumper Settings
20 kB
Manufacturer Celestial Systems, USA | Date 1988 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- Prototyping Board
- double-sided board
- >4400 plated through holes on a 0.1" grid pattern
- prototyping area accepts DIP packages up to 64 pins and PGA packages up to 14×14 pins
- I/O connector area and mounting bracket supports D-Sub connectors up to 25 pins
- low-inductance ground and power pattern
- gold plated edge connector
Advert (US)
1988-08
Advert (US)
1989-03