Manufacturer “MLC”
3 expansions in database
Amtari
Manufacturer
MLC, Germany
Date
1993
Amiga
A2000, A3000, A4000
Interface
Zorro II
    Atari emulation
  • accepts v1.6 or v2.06 Atari ROMs
  • requires at least Kickstart 2.04 and MMU (68020 + 68851 or 68030)
  • does not support 68040 processors
  • supported screenmodes:
    • 640×400, monochrome
    • 640×200, 4 colours
    • 320×200, 16 colours
    • user defined normal or ECS Amiga resolutions, monochrome
  • supports up to two disk drives
  • uses Amiga parallel and serial ports
  • stores up to five Atari partitions in one Amiga hardfile (no dedicated Atari partition)
  • card does not support autoconfig, it mounts itself at $F40000 - $F7FFFF which may conflict with other cards
Photos
MLC Amtari - front side
front side
MLC Amtari - back side
back side
Manual
  • Amtari.pdf
    Bedienungsanleitung / User Manual (german)
    4.8 MB
Driver / Installation Disk
Vintage Advert

Advert (DE)
1993-12

Randy-ROM
Manufacturer
MLC, Germany
Date
1995
Amiga
any Amiga
Interface
IDE header
    External CD-ROM and Hard Drive
  • attaches an external CD-ROM drive or hard drive to the A600, A1200 and A4000 internal IDE controller
  • for the A500, used in conjunction with the AlfaPower and AlfaPower Plus IDE controllers which attaches to the side expansion port
  • supplied with a unbuffered 4-port IDE adapter ("Multi-IDE Adapter") which provides 2 IDE interfaces (each with master/slave device)
  • due to the unbuffered connection of external drives with long cables, the connection is prone to EMI issues and works reliably only with two drives - the later introduced buffered IDE adapter of Randy-ROM II solves this issue
  • requires Kickstart v2.04 on A500 and v2.05 on A600
  • delivered with CacheCDFS CD-ROM filesystem and CD32 emulator
Vintage Advert

Advert (DE)
1995-05

Advert (DE)
1995-05

Randy-ROM II
Manufacturer
MLC, Germany
Date
1996
Amiga
any Amiga
Interface
IDE header
    External CD-ROM and Hard Drive
  • attaches an external CD-ROM drive or hard drive to the A600, A1200 and A4000 internal IDE controller
  • for the A500, used in conjunction with the AlfaPower and AlfaPower Plus IDE controllers which attaches to the side expansion port
  • supplied with a buffered 4-port IDE adapter ("Multi-Drive Adapter") which provides 2 IDE interfaces (each with master/slave device)
  • on A600 and A1200, the metal shielding needs to be cut or omitted after installation, as the IDE adapter doesn't fit otherwise
  • three jumpers on the adapter to cut the Select signals for the individual connectors, needed for some hard drives which prevent the Amiga from booting
  • delivered with IDEfix IDE driver, CacheCDFS CD-ROM filesystem and CD32 emulator
  • requires Kickstart v2.04 on A500 and v2.05 on A600
  • optional audio kit installs into external CD-ROM drive housing and allows simultaneous playback of Amiga and CD-ROM sound
    Jumper Settings
    JumperFunction
    2.5"/3.5" HDDON: 3.5" HDD (OUT1b)
    OFF: 2.5" HDD (OUT1a)
    SELECTSelect Signal for connector OUT2a (left), OUT1b (middle), OUT1a (right)
    ON: Select signal active
    OFF: Select signal off
Manual
Vintage Advert

Advert (DE)
1996-04

Advert (DE)
1996-04