Amiga Hardware Database
Home
Models
Expansions
Manufacturers
new
Benchmarks
Search
About
en
|
de
Home
>
Expansions
>
Processor Expansions for A500
>
Single Expansion
VXL*30
Manufacturer
Microbotics
, USA
Date
1991
Amiga
A500, A2000
Interface
68000 socket
Autoconfig ID
1010 / 68,69
1010 / 136
processor
68EC030 or 68030 @ 25 / 40 / 50 MHz
optional PLCC FPU up to 68882 @ 50 MHz
optional VXL RAM-32 memory board
the VXL RAM-32 board needs a VXL-030 rev3.0 board, older revisions (v1.0 and v2.0) must be upgraded (exchange of 10 ICs)
2 or 8 MB RAM using sixteen 256k×4 or 1M×4 DIP chips
Kickstart socket for a 2.04 ROM - not accessed in 68000 mode
hardware maprom even from the motherboard ROM
burst RAM access selectable with a jumper - works only with 60 ns page mode DIPs
RAM access speed selectable with a jumper, 60 or 80 ns
the address space of the memory can be set inside or outside of the 68000 memory space
if set inside, DMA is supported into the 32 bit RAM
in 68000 mode the RAM is still usable, it just becomes 16 bit wide
notes
the 68000 fallback mode is switchable either by software or jumper
connects into the 68000 socket - the 68000 is replaced onto the board
Photos
with RAM-32, front side
with RAM-32, back side
front side
Manual
VXL30-Configuration.pdf
Configuration, Chip Installation, and Upgrade Notes (english)
432 kB
VXL30-Installation.pdf
Installation and Operations Guide to VXL*30 and RAM-32 (english)
54 kB
VXL30-RAM32.pdf
RAM32 - Installation and Configuration Diagram and Notes (english)
236 kB
VXL30-Sticker1.png
sticker (english)
77 kB
VXL30-Upgrade.pdf
Upgrade Notes for Use with RAM-32 (english)
168 kB
Driver / Installation Disk
VXL30-12.dms
setup disk v1.2
239 kB
Vintage Advert
Advert (DE)
1991-11
Advert (US)
1992-01
Advert (US)
1992-01
Advert (US)
1992-10
Advert (GB)
1993-02
Benchmark
AIBB Benchmark