|
SX-1 |
 |
 |
 |
Company
Paravision / Microbotics, USA | | Date
1994 | | Amiga
CD32
| | Interface
trapdoor slot
| | Autoconfig ID
1010 / 129
1010 / 193
|
|
- turns the CD32 into an A1200
- external box (15 × 20 × 6 cm), plugs into the rear expansion connector
- passthrough connector, the FMV module still fits inside the CD32
memory
- one 72 pin SIMM socket
- accepts up to 4 MB RAM with the FMV module installed or 8 MB without it
- supports 1, 2, 4 or 8 MB SIMMs, 80 ns or faster
- when 8 MB is installed, it appears as two blocks of 4 MB
- memory disable jumper
interfaces
- serial DB9 male, RS232
- parallel DB25 female, Centronics
- video DB23 male, analog RGB
- external floppy DB23 female
- internal 44 pin IDE header
- external DB37 IDE connector
- 6 pin mini-DIN audio input for mixing external audio and CD32 sound
- 5 pin DIN connector for an IBM-AT keyboard
notes
- the serial, parallel and floppy ports are controlled by two onboard CIA chips
- place for a 2.5" hard disk inside the case
- boot delay jumper - adds a 10 second delay before booting for slow hard drives
- supports up to three floppy drives
- disables the Aux port's serial connection feature - it can be used to attach Amiga keyboards only
- battery backed up clock
- disable switch - leaves alive the RGB port, the memory and the clock
jumper settings
| 1 - | SIMM type: ON - double sided, OFF - single sided |
| 2 - | SIMM size: ON - 4 or 8 MB, OFF - 1 or 2 MB |
| 3 - | RAM autoconfig: ON - disabled |
| 4 - | autoboot delay: ON - enabled |
| 5 - | AT keyboard: ON - two Alt keys, OFF - right Alt key mapped to right Control key |
Photo
|
Main board, front side
Main board, back side
|
Connector board, front side
Connector board, back side
|
|
|
