Amiga Hardware DatabaseSearch Result
9 expansions found
Manufacturer Phoenix Microtechnologies, Australia | Date 1990 | Amiga A500, A1000 | Interface side expansion port |
- FastRAM expansion
- supports 0.5, 1, 2, 4 or 8 MB configurations
- memory autoconfiguration
- autoconfiguration disable switch
- connects to the side expansion port
- versions for A500 and A1000 differ in case and passthrough option, passthrough connector is only featured in the A1000 version
- battery backed realtime clock
Manufacturer Phoenix Microtechnologies, Australia | Date 1990 | Amiga A500 | Interface trapdoor slot |
- memory expansion
- 512kB RAM
- four 1M×1 DIPs
- connects to the trapdoor slot
- battery backed up clock
- disable switch
Advert (AU)
1991-12
Manufacturer Phoenix Microtechnologies, Australia | Date 1991 | Amiga any Amiga | Interface parallel port |
- 8 bit mono sound sampler
- maximum sampling rate: > 20 kHz
- monaural input: 1× RCA (line input) and 1× microphone input (jack)
- jumper to select either RCA or microphone jack as input
- level adjustment knob (gain control)
- provided with schematic in the manual and hints how to change certain properties (gain, roll-off, sampling rate) by changing components on the PCB
- connects to the parallel port
- AP420.dms
tool disk
120 kB
Advert (AU)
1992-07
Manufacturer Phoenix Electronics, USA | Date 1989 | Amiga A1000, A500 | Interface side expansion port |
- Zorro II expansion chassis
- two Zorro II slots
- connects to the side expansion port, has passthrough connector
- unbuffered design, supports only one DMA device
- lack of buffering means that configuring information must pass from one card to the next:
- a jumper allows use of the second slot if the first is unoccupied
- another jumper lets using peripherals connected to the passthrough connector in case both slots are empty
- optional internal power supply with power connector for a hard disk drive
- does not supply -12V to the Zorro slots
- no power switch
- variations
- Expansion Technologies has sold it under the name ToolBox, but only Phoenix has manufacured it
- the only difference is the logo on the chassis
no PSU 1 Amp PSU 3 Amp PSU A1000 EEC-2100
PEC-2100EEC-2110
PEC-2110EEC-2120
PEC-2120A500 EEC-2500
PEC-2500EEC-2510
PEC-2510EEC-2520
PEC-2520 - PEC: Phoenix Expansion Chassis
- EEC: Expansion Technologies ToolBox
- compatibility
- boards reported to be working:
- Commodore A2052
- Commodore A2058
- Commodore A2088XT
- Commodore A2090
- Commodore A2090A
- IVS TrumpCard
- MicroBotics 8-Up
- Phoenix PEC-2000 / Expansion Technologies Flash!Card
- Xetec FastCard
- boards reported to be not working:
- ASDG Dual Serial Board
- C-Ltd Kronos
- Checkpoint Serial Solution
- GVP Impact SCSI
- Microbotics HardFrame
- Supra 2400zi
front side
back side
Advert (US)
1989-03
Manufacturer Phoenix Electronics, USA | Date 1988 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- SCSI controller
- AMD 5380 controller IC
- uses DMA transfers
- autoboot ROM - autobooting requires at least Kickstart 1.3
- 50 pin internal header
- DB25 external connector
- place for a 3.5" hard disk on the card
front side
back side
Manufacturer Phoenix Electronics, USA | Date 1987 | Amiga A1000 | Interface side expansion port |
- SCSI controller
- AMD 5380 controller IC
- does not autoboot
- 50 pin external SCSI header
- connects to the side expansion port
front side
Advert (US)
1988-04
Manufacturer Phoenix Electronics, USA | Date 1987 | Amiga A500 | Interface side expansion port |
- SCSI controller
- AMD 5380 controller IC
- does not autoboot
- 50 pin external SCSI header
- connects to the side expansion port
- passthrough connector
Advert (US)
1988-04
Manufacturer Phoenix Microtechnologies, Australia | Date 1991 | Amiga A1000 | Interface special (see text), |
- 8 MB RAM for the Phoenix A1000 motherboard
- 16 ZIP sockets
- takes 1M×4 ZIPs
- connects into the 96 pin DIN connector
front side
back side
Manufacturer Phoenix Microtechnologies, Australia | Date 1990 | Amiga A1000 | Interface special (see text) | Autoconfig ID 2101 / 34 |
- replacement A1000 motherboard
- replaces the original A1000 motherboard
- includes all ports of the original A1000 motherboard
- adds a Zorro II and a video slot
- Paula, Denise, the CIAs and the 68000 have to be transfered from the old motherboard
- Agnus is not transfered, it is replaced by Fat Agnus
- ECS compatible
- Kickstart 1.3 preinstalled
- can hold four Kickstarts, two of which can be selected with the Kickstart Swap Switch
- two sockets for standard Commodore Kickstart ROMs
- four sockets for a set of up to 4×8 megabit EPROMs
- one socket for a 16 bit wide EPROM (8 megabit)
- internal RS232 serial header (same as on the A2000 motherboard)
- monochrome video output (RCA) instead of the A1000's composite colour output
- PGA FPU socket and oscillator socket
- disk drive swap switch - allows booting from a floppy disk drive other than DF0:
- software switching of the 7.5 kHz audio filter - disabling the filter dramatically improves sound quality
- battery backed up clock
- all chips are socketed
- memory on motherboard
- 16 DIP sockets accept up to 2 MB RAM
- accepts 256k×4 DIPs in groups of four
- possible configurations:
- 512 kB Chip RAM
- 512 kB Chip + 512 kB Fast RAM
- 1 MB Chip RAM
- 1 MB Chip + 1 MB Fast RAM
- 2 MB Chip RAM (requires Super Agnus to be installed)
- optional memory daughterboard (
- 16 ZIP sockets for 8 MB RAM
- takes 1M×4 ZIPs
- connects into the 96 pin DIN connector
)
- SCSI controller
- autoboot ROM
- 5380 controller IC
- 50 pin internal SCSI header
- optional DB25 external connector kit
- optional internal hard disk mounting kit
- SCSI-Direct support
- does not support the RDB standard
- on revision I motherboards a hardware interrupt logic is implemented
- allows the SCSI subsystem to work with disconnect/reconnect and diskchange interrupts
- provides better compatibility with SCSI2 hardware and CD-ROMs
- increases performance of non-HD devices
- A-Max driver
- optional genlock clock module
- with a 2 MB ECS Agnus genlocks are not supported without this module
- connects into the oscillator socket of the Phoenix motherboard
front side
- Phoenix.pdf
user manual (english)
1297 kB - PhoenixGenlockModule.pdf
Genlock Clock Module Installation Instructions (english)
78 kB
- Phoenix-J.dms
support disk, version J
435 kB - Polled-pbscsi.lha
Aminet
replacement SCSI driver (pbscsi.device v7.17)
15 kB
Advert (AU)
1991-06
Advert (AU)
1991-12
Advert (US)
1992-03
Advert (AU)
1992-06