Amiga Hardware DatabaseManufacturer Ingenieurbüro Helfrich, Germany | Date 1993 | Amiga A2000A3000, A4000 | - - | Interface Zorro IIZorro III | Autoconfig ID 2195 / 5,6 |
- RTG graphics card
- Cirrus Logic GD5426
- 85 MHz in 8 bit modes
- 45 MHz in 16 bit
- 28 MHz in 24 bit
- 1 or 2 MB DRAM
- screen modes
- 1600×1280×8 interlace
- 1152×864×16 interlace
- 800×600×24 non-interlace
- notes
- Zorro II / III autosensing
- automatic passthrough
- two 15 pin DSUB connectors
- S-VHS and FBAS connectors for the optional video encoder module
- early boards may have problems with GVP Combo cards - the memory / bus controller has to be replaced on the Piccolo
- feature connector for connecting the VideoCruncher digitizer card
- Picasso96, CyberGraphX 2, 3, 4, EGS and custom drivers
- supported by Linux, NetBSD and OpenBSD
front side
back side
Piccolo video module, front side
Piccolo video module, back side
front side
front side
connectors, right side
- Piccolo-1.dms
install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 1
EGSAmigaDriver v6.011, egs.library v6.100
357 kB - Piccolo-2.dms
install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 2
EGSAmigaDriver v6.011, egs.library v6.100
769 kB - Piccolo-3.dms
install disk with PicoPainter v1.3 and loaders for AdPro / ImageMaster, disk 3
EGSAmigaDriver v6.011, egs.library v6.100
776 kB - piccolo_1of3.dms
Installer's Heaven
install disk 1
739 kB - piccolo_2of3.dms
Installer's Heaven
install disk 2
424 kB - piccolo_3of3.dms
Installer's Heaven
install disk 3
314 kB
Advert (US)
1993-11
Advert (DE)
1993-10
Advert (DE)
1993-10