Amiga Hardware DatabaseSearch Result
2 expansions found
Manufacturer DKB, USA | Date 1988 | Amiga A1000 | Interface 68000 socket |
- Kickstart switcher
- eliminates the need for disk-based Kickstart and so makes the A1000 boot faster
- one socket with Kickstart 1.2 or 1.3 installed
- can be switched back to Kickstart disk based operation with a jumper for pre-1.3 software compatibility
- pressing Control Amiga Amiga for more than three seconds will also revert to disk based Kickstart
- frees up the 256 kB Kickstart RAM
- connects to the 68000 socket
- the PAL at location 6J of the WCS daughterboard has to be replaced with the supplied PAL
- can be installed together with the DKB Insider - KwikStart has to be at the bottom, Insider on top of it
Advert (US)
1990-12
Advert (US)
1991-04
Advert (US)
1991-07
Manufacturer DKB, USA | Date 1990 | Amiga A1000 | Interface 68000 socket |
- Kickstart switcher
- eliminates the need for disk-based Kickstart and so makes the A1000 boot faster
- two sockets allow both 1.3 and 2.0 ROMs installed at once
- can switch between ROMs using the keyboard without shutting off the computer
- if only one ROM is installed, the A1000 can be switched back to disk-based operation for pre-1.3 software compatibility
- connects to the 68000 socket
- installation involves the replacement of a soldered PAL chip (6J on the daughterboard)
- does not allow using the freed up 256 kB Kickstart RAM - the larger Kickstart 2.0 uses that address space
front side
back side
Advert (US)
1990-12
Advert (US)
1991-04
Advert (US)
1991-07
Advert (US)
1992-01
Advert (US)
1992-12