Search Result
2 expansions found
Manufacturer
DKB, USA
Date
1987
Amiga
A1000
Interface
68000 socket
  • 32 DIP sockets for 1 MB RAM
  • 256k×1 DIPs
  • autoconfigures under Kickstart 1.2, requires AddMem under Kickstart 1.1
  • the starting memory address is DIP switch selectable to one of nine address blocks
  • the memory can be disabled / enabled by software
  • battery backed up clock
  • connects to the 68000 socket
  • two or four (depending on revision) jumper wires have to be connected to the motherboard
  • can be installed together with the DKB KwikStart - Insider has to be on the top of the KwikStart
DKB Insider -  front side
front side

Advert (US)
1987-03

Manufacturer
DKB, USA
Date
1989
Amiga
A1000
Interface
68000 socket
    Internal FastRAM Expansion
  • twelve DIP sockets accept 1.5 MB RAM
  • supports 256k×4 DIPs only
  • accepts DIPs in groups of four giving 0.5, 1, 1.5 MB configurations
  • battery backed up clock
  • connects to the 68000 socket, the 68000 is replaced onto the board
  • compatible with the DKB KwikStart II and ICD AdSpeed boards
  • NTSC A1000s: a clip has to attached to pin 14 of the chip at location P6 on the daughterboard
  • PAL A1000s: due to space constraints the clip doesn't fit, so it has to be cut off and the wire has to be soldered to pin 7 of the chip at location U4S on the motherboard
  • RAM banks have to be occupied starting from bank 1 (the bank toward the 68000)
    DIP Switch Settings
    Switch Setting Description
    1 OFF Reserved
    2 ON Autoconfig ($C00000)
    OFF No Autoconfig ($800000)
    3 & 4 OFF & OFF no memory installed
    ON & OFF bank 1 occupied (512K)
    OFF & ON bank and 2 occupied (1 MB)
    ON & ON all banks occupied (1.5 MB)
DKB Insider II -  front side
front side
DKB Insider II -  back side
back side

Advert (US)
1990-12

Advert (US)
1991-04

Advert (US)
1991-07

Advert (US)
1992-01

Advert (US)
1992-12