uses 64 kB of the Zorro II address space for accessing the 512 kB / 1 MB FlashROM
allows storage of software which are run at startup of the Amiga
reprogrammable up to 100.000 times
extra clock port
allows using expansions initially designed for the A1200 clock port
the orientation of the port is geared toward expansions by Individual Computers (eg. the SilverSurfer), other expansions (eg. Melody 1200) do not fit correctly
when installed in Zorro slot, pin 40 of the card's clock port is towards the front side of the computer, pin 19 resp. pin 1 towards the rear side
marked wire of clock port expansions go to pin 19 or pin 40, depending on the manufacturer's definition - e.g. expansions made by Individual Computers are installed with the red stripe on pin 40 (to the left), expansions of E3B mark pin 19 / pin 1 (to the right)
optional 1 GB flash module is in development, will connect to the clock port
write protection jumper against unwanted reprogramming