Amiga Hardware DatabaseCompany VMC Harald Frank, Germany | Date 1996 / 1997 | Amiga A1200A2000, A3000, A4000 | - - | Interface clock portZorro II | Autoconfig ID 5001 / 2,3 |
- serial and parallel interfaces
- Hypercom 1 / PortJnr
- tiny 2x4 cm board
- connects to A1200's clock port
- Exar 16C650 UART chip
- one DB25 RS232 serial port
- 50 to 460800 bps transfer speed
- 64 byte FIFO buffer (32 byte receive, 32 byte send)
- may have problems with 1D4 motherboard revision
- requires some modifications in order to work together with the Melody 1200 audio board
- not compatible with Mikronik towers
- Hypercom 3 & 3Z / PortPlus
- Hypercom 3: connects to A1200's clock port
- Hypercom 3Z: Zorro II version
- Exar 16C552 or 16C553 UART chip
- one DB25 bidirectional parallel port with 500 kB/s transfer speed
- one DB9 and one DB25 RS232 serial port with up to 460800 bps transfer speed
- 32 byte FIFO buffer (16 byte receive, 16 byte send)
- A1200 version may have problems with 1D4 motherboard revision
- requires some modifications in order to work together with the Melody 1200 audio board
- not compatible with Mikronik towers
- Hypercom 3Z serial ports are supported by NetBSD
- Hypercom 3i
- expansion module for the Hypercom 3Z / 4 and the ISDN Blaster
- Exar 16C552 UART chip
- two additional DB25 460800 bps buffered serial ports
- one additional DB25 500 kB/s buffered bidirectional parallel port
- 32 byte FIFO buffer (16 byte receive, 16 byte send)
- Hypercom 4
- Zorro II
- two Exar 16C554 or 16C654 UART chips
- four DB25 RS232 serial ports with up to 460800 bps transfer speed
- 32 byte FIFO buffer (16 byte receive, 16 byte send)
- up to five Hypercom 4 can be installed into one Amiga
- supported by NetBSD
Hypercom 1 / PortJnr, front side
Hypercom 1 / PortJnr, back side
Hypercom 4, front side