Manufacturer
Kupke, Germany
Date
1991
Amiga
A1000
Interface
side expansion port
    processor
  • 68030 @ 14 MHz (synchronous with the A1000)
  • optional FPU - it can either run at 14 MHz, or use a separate crystal up to 50 MHz
    memory
  • 32 DIP sockets accept up to 16 MB RAM
  • supports 256k×4 (514256) or 1M×4 (514400) DIPs, 80 ns or faster
  • accepts DIPs in groups of eight
    notes
  • connects to the side expansion port
  • passthrough connector - has mechanical problems with expansions whose plug is thicker than 9.5 mm
  • 68000 fallback mode (also disables the memory expansion)
  • has problems with old hard disk systems without any kind of handshake (either hardware or software handshake) - most of the RLL/MFM controllers (e.g. OMTI) do not work
  • does not work with some old hardware like memory expansions or clock modules - they need a modification
    jumper settings
    JumperDefaultDescription
    JP101-FPU Oscillator: 1-2 - no oscillator present, 2-3 - oscillator present
    JP201OFFMMU Disable: ON - MMU disabled, OFF - MMU enabled
    JP202OFFCPU Cache Disable: ON - Cache disabled, OFF - Cache enabled
    JP302ONCache Chip Memory: ON - caching disabled, OFF - caching enabled
    JP303-1MBit/4MBit: ON - 1MBit, OFF - 4 MBit
    JP304-reserved
    JP305-reserved

Advert (DE)
1993-11