all it needs is a simple software driver and ROM(s) from the computer to be emulated
all timers, interrupts, clocks are handled on hardware level
support for custom EPROMs, static RAM, and SIMM modules for any methods of storing computer OS
four empty 32 pin ROM / RAM sockets for OSs stored in DIP format (like 128 kB Mac ROMs) and a ROM SIMM socket
Macintosh emulation
uses the same standard serial IC as Macs
AppleTalk is fully supported via two optional 8 pin mini-DIN serial ports, (230400 bps normally, 921600 bps between two Emplants via AppleTalk, 460800 bps when connected to a Doubletalk board) - Appletalk printer / network support
optional autobooting SCSI controller (NCR 53C80) - pseudo DMA transfers up to 1.1 MB/s (not necessary if the Amiga has SCSI already)
serial and SCSI can be used on the Amiga side independently or simultaneously
optional hardware (Sybil - two passthrough connectors: one plugs into RGB, other into parallel) to handle 800 kB Mac floppy disks
Sybil operates by changing the clock speed of the Amiga's custom chips to match the different data rates of Mac formatted disks (the video display gets very distorted because of this)
Sybil can be disabled with a switch
optional e586 module
the SCSI controller is supported by NetBSD and OpenBSD