Digi Tiger III
Manufacturer
Klaus D. Tute, Germany
Date
1994
Amiga
any Amiga
Interface
parallel port
    Framegrabber
  • external Slow-Scan digitizer for the parallel port
  • 1× RCA connector for composite video input signal
  • 1× mini DIN connector for Y/C input
  • built in colour splitter
  • saturation, brightness and contrast controls at the front panel
  • automatic synchronisation control
  • supports the OCS and AGA screen modes
  • grabs 2 - 64 colors, 4096 colour (HAM), 16.7M colors (HAM8) or 16 gray level monochrome images
  • sepia and pseudo-color effects
  • supports S+HAM algorithm
  • digitization of monochrome images in 1-5s, color images in 20-45s
  • test mode: grabs 75 monochrome images per second in 320×256 using a fixed palette for each picture (not user definable)
  • in lores modes DigiTiger captures images continuously and stops only when a mouse button is pressed
  • in hires modes only a single frame is captured while the display is turned off due to the limited data rate to Chip RAM (except on Amigas with AGA chipset)
  • features a smaller housing than its predecessors
  • external power supply
    Notes
  • expansion was delivered with the DigiTiger II manual
Photos
Klaus D. Tute Digi Tiger III - front side
front side
Klaus D. Tute Digi Tiger III - back side
back side
Manual
Driver / Installation Disk
Vintage Advert

Advert (DE)
1995-11