Amiga Hardware DatabaseManufacturer Ingeniørfirmaet Finn Jacobsen, Denmark | Date 1989 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- SCSI Controller
- two 50 pin internal headers to connect SCSI devices
- uses PIO transfers (no DMA)
- no autoboot ROM, requires boot floppy disk
- device name: danamiga1.device
- hard card - a hard disk can be mounted on the card itself
- Serial Interface
- two serial ports
- two baud tables, applies to both ports and is set by software:
- baud table 1: bitrate 50 - 38.400 bps
- baud table 2: bitrate 110 - 19.200 bps
- 1× DB9 (SER1) and 1× DB25 (SER2) connectors
- device name: seriel.device
- MIDI bitrate is not supported