Amiga Hardware DatabaseCompany Bill's Boards, USA | Date 1988 | Amiga A1000, A500 | Interface side expansion port |
- expansion chassis
- a set of three boards:
- driver board - connects to the side expansion port and drives a high quality / low loss cable which feeds the motherboard
- motherboard - holds the expansion slots
- bus termination board
- six Zorro II slots
- six or seven ISA (four or five AT, two XT) slots which are inline with three Zorro slots
- the arrangement of the slots is similar to the A2000 motherboard
- the Zorro slots do not fully support the three additional interrupt lines of the Zorro II specification (compared to Zorro I)
- the motherboard is sized and drilled to fit in a baby IBM AT case (which is not supplied)
- a power supply is required but not supplied