Amiga Hardware DatabaseCompany BSC, Germany | Date 1992 | Amiga A500 | Interface side expansion port | Autoconfig ID 2049 / 62092 / 6 |
- IDE controller
- uses polled I/O, not DMA transfer
- RDB compatible
- 40 pin internal IDE header
- place for a 3.5" hard disk inside the case
- delivered with A.L.F. 2 driver software
- during transfers the high and low bytes are swapped as the A600/A1200/A4000 and PCs do so the drives formatted with them can be handled by the AT-Bus 508
- memory
- sixteen ZIP sockets accept 8 MB RAM
- supports either static column or page mode ZIPs
- accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB configurations
- notes
- connects to the side expansion port, no passthrough connector
- RAM and HD can be disabled by switch on the back of the case
- connector for the optional external power supply, though it can use power from the A500
PCB, front side
case, front side
case, right side
case, left side
PCB, back side
- BSC-HD.pdf
Controller Hardware and Software Installation Manual (english/german)
443 kB
- AT-Bus_508-35.dms
install disk
454 kB - AlfaPower_AT-Bus_ROM-610.zip
ROM v6.10
13 kB
Advert (DE)
1991-11