Algor & Algor Pro
Manufacturer
E3B, Germany
Date
2003 & 2004
Amiga
A2000, A3000, A4000
Interface
Zorro II
Autoconfig ID
2145 / 203
    USB interface
  • three USB connectors
  • compatible with USB 1.1 and 2.0 specifications (but supports only USB 1.1 transfer speeds)
  • all ports are protected against overvoltage and short circuit
  • integrated power management on port by port base
  • implements most of the USB protocol handling completely in hardware
  • internally operates completely in 32 bit
  • shipped with a full license of the Poseidon USB stack
  • integrated 512 kB (Algor Pro: 1 MB) flash ROM to transparently include the USB stack right after cold powerup, boot off USB mass storage devices, use USB mice and keyboards during Early Startup Menu and to include system patches like those from OS3.9
  • Algor Pro can transparently compress the flash ROM contents, increasing the actual capacity to over 1.7 MB
  • 38 pin expansion header for the ethernet module or for serial/parallel port expansions (HyperCom 3i)
    optional 10 Mbit Ethernet module - Norway
  • connects to the 38 pin expansion connector
  • NE2000 compatible chip with integrated 16 kB buffer
  • RJ45 (10BaseT) internal connector
  • DB9 external connector - a DB9 to RJ45 adaptor is supplied
  • network status display by four LEDs
  • SANA II driver
    notes
  • requires at least 68030 @ 25 MHz
  • driver for USB mouse and keyboard (HID devices), parallel interface (printers) and flash card readers (SCSI emulation) are included
Photos
E3B Algor & Algor Pro - front side
front side
Manual