Amiga Hardware DatabaseSearch Result
12 expansions found
Manufacturer Elbox, Poland | Date 1999 | Amiga A4000 | Autoconfig ID 2206 / 20 |
- Zorro busboard
- 7× Zorro III slots
- 1× extended video slot (inline with a Zorro slot)
- 5× PCI slots
- replaces the original A4000 daughterboard
- the PCI slots can be activated by the Mediator PCI 4000 bridgeboard
- the board is part of the Elbox E/BOX 4000 Tower system
- 3× 5.25" external drive bays
- 1× 3.5" external drive bay
- 6× 3.5" internal drive bays
- 230W power supply
front side
Manufacturer Eagle Computer Products, Germany | Date 1995 | Amiga A4000 |
- Zorro III busboard
- 8× Zorro II/III slots
- 2× extended video slots
- 5× ISA slots
- notes
- the video and ISA slots are all inline with a Zorro slot
- replaces the original A4000 daughterboard
- the board is part of the Eagle A4001 tower system, it cannot be fitted into the original A4000 case
- 6× 5.25" external drive bays
- 2× 3.5" external drive bays
- 2× 3.5" internal drive bays
- optional 230W power supply
- the original A4000 power supply can also be installed additionally
Manufacturer DCE, Germany | Date 2001 | Amiga A4000 |
- PCI busboard
- replaces the original A4000 daughterboard, fits into the standard A4000 desktop case
- four Zorro III slots and one extended video slot (exactly at the same location as on the original daughterboard)
- four PCI 2.1 compliant slots
- 33 MHz PCI clock
- all slots are DMA capable
- up to 50 MB/s transfer speed between PCI cards and the CyberStorm
- 1.76 GB address space without bank switching
- the CyberStorm firmware has to be updated
- drivers
- CyberGFX 4 and Warp3D drivers for Voodoo3, Voodoo4, Voodoo5, Permedia2, ViRGE, ViRGE/DX and SiS6326 graphics cards
- driver for Brooktree and Conexant Fusion based TV/Video cards with Microtune or Philips tuners
- driver for certain Realtek based network cards
- driver for certain ESS and ForteMedia sound cards
- despite many announcements, USB drivers were not released
front side
back side
front side
back side
Manufacturer Elbox, Poland | Date 2002 | Amiga A3000 | Autoconfig ID 2206 / 33,36,161 |
- PCI busboard
- five PCI 2.1 compliant slots
- 33 MHz PCI clock (264 MB/s with SharkPPC G3/G4)
- up to 132 MB/s transfer speed between PCI cards
- 4 GB continuous PCI memory space accessed through the 512 MB window in the Zorro III address space
- uses the same PCI to Zorro III bridgeboard as the Mediator 4000D
- Zorro III busboard
- six Zorro III slots
- supports Zorro III autoconfig
- one video slot
- notes
- supports the busmastering mechanism in all PCI slots
- supports DMA transfers between PCI cards and the A3000 motherboard
- address and data parity control support in all PCI slots
- four PCI interrupt lines
- can use the SDRAM/SGRAM of PCI display cards as system memory - faster than memory on Amiga processor cards
- works with all existing A3000 processor cards
- the board is part of the Mirage 3000 tower system, it cannot be fitted into the original A3000 case
- Mediator Multimedia CD
- Picasso96 2D drivers for: Voodoo5, Voodoo4, Voodoo3, Voodoo Banshee, S3 Virge and S3 Virge DX PCI graphic cards
- Warp 3D drivers for: Voodoo3, Voodoo4 and Voodoo5 PCI graphic cards
- Sana II network drivers for 10 and 100 Mbps PCI Ethernet cards
- AHI sound drivers for: Sound Blaster 128 and ForteMedia FM801 based PCI cards
- TV tuner drivers for most available PCI TV tuner cards (98 TV card models, several tuners supported) - requires a PCI graphics card
- USB drivers for the Elbox Spider PCI card - EHCI (Hi-Speed USB 2.0) and OHCI (Full-Speed and Low-Speed USB 1.1) drivers for the Poseidon stack
- MPEG-2 Audio and Video hardware decoder PCI card drivers are in development
Manufacturer Elbox, Poland | Date 2001 | Amiga A4000 | Autoconfig ID 2206 / 33,34,35,161 |
- PCI busboard
- five PCI 2.1 compliant slots
- 33 MHz PCI clock (66 MHz with SharkPPC G3/G4)
- up to 132 MB/s transfer speed between PCI cards (264 MB/s with SharkPPC G3/G4)
- 4 GB continuous PCI memory space accessed through the 512 MB window in the Zorro III address space
- Zorro III busboard
- six Zorro III slots
- supports Zorro III autoconfig
- one extended video slot
- busmastering controller
- supports the busmastering mechanism in all PCI slots
- supports DMA transfers between PCI cards and the A4000 motherboard
- address and data parity control support in all PCI slots
- four PCI interrupt lines
- can use the SDRAM/SGRAM of PCI display cards as system memory - faster than memory on Amiga processor cards
- works with all existing A4000 processor cards
- the board is part of the Mirage 4000Pro tower system, it cannot be fitted into the original A4000 case
- Mediator Multimedia CD
- Picasso96 2D drivers for: Voodoo5, Voodoo4, Voodoo3, Voodoo Banshee, S3 Virge and S3 Virge DX PCI graphic cards
- Warp 3D drivers for: Voodoo3, Voodoo4 and Voodoo5 PCI graphic cards
- Sana II network drivers for 10 and 100 Mbps PCI Ethernet cards
- AHI sound drivers for: Sound Blaster 128 and ForteMedia FM801 based PCI cards
- TV tuner drivers for most available PCI TV tuner cards (98 TV card models, several tuners supported) - requires a PCI graphics card
- USB drivers for the Elbox Spider PCI card - EHCI (Hi-Speed USB 2.0) and OHCI (Full-Speed and Low-Speed USB 1.1) drivers for the Poseidon stack
- MPEG-2 Audio and Video hardware decoder PCI card drivers are in development
front side
front side
- Mediator_PCI_4000_QIG.pdf
Elbox
installation guide (english)
550 kB
Manufacturer Elbox, Poland | Date 2002 | Amiga A4000 | Autoconfig ID 2206 / 41 |
- PCI and Zorro III busboard
- replaces the original A4000 daughterboard, fits into the standard A4000 desktop case
- three free Zorro III slots
- no video slot
- four PCI 2.1 compliant slots
- 33 MHz PCI clock (66 MHz with SharkPPC G3/G4)
- up to 132 MB/s transfer speed between PCI cards (264 MB/s with SharkPPC G3/G4)
- 4 GB continuous PCI memory space accessed through the 512 MB window in the Zorro III address space
- busmastering controller
- supports the busmastering mechanism in all PCI slots
- supports DMA transfers between PCI cards and the A4000 motherboard
- address and data parity control support in all PCI slots
- four PCI interrupt lines
- can use the SDRAM/SGRAM of PCI display cards as system memory - faster than memory on Amiga processor cards
- works with all existing A4000 processor cards
- Mediator Multimedia CD
- Picasso96 2D drivers for: Voodoo5, Voodoo4, Voodoo3, Voodoo Banshee, S3 Virge and S3 Virge DX PCI graphic cards
- Warp 3D drivers for: Voodoo3, Voodoo4 and Voodoo5 PCI graphic cards
- Sana II network drivers for 10 and 100 Mbps PCI Ethernet cards
- AHI sound drivers for: Sound Blaster 128 and ForteMedia FM801 based PCI cards
- TV tuner drivers for most available PCI TV tuner cards (98 TV card models, several tuners supported) - requires a PCI graphics card
- USB drivers for the Elbox Spider PCI card - EHCI (Hi-Speed USB 2.0) and OHCI (Full-Speed and Low-Speed USB 1.1) drivers for the Poseidon stack
- MPEG-2 Audio and Video hardware decoder PCI card drivers are in development
Manufacturer MicroniK, Germany | Date 1998 | Amiga A1200 | Interface trapdoor slot | Autoconfig ID 3855 / 1 |
- Micronik Z-3i (6860 rev6.2 - 6.3)
- 5× Zorro II/III slots
- 1× extended video slot
- 2× PCI slots
- 1× ISA slot
- 1× A4000 CPU slot - an A4000 processor board is required for Zorro III operation
- a 72 pin SIMM socket for up to 8 MB RAM
- SCSI controller (123.device) with 50 pin internal SCSI header
- Micronik Z-3i Mk2 (6860 rev6.6 - 6.8)
- 5× Zorro II/III slots (the middle slot is Zorro II only)
- 1× extended video slot
- 3× PCI slots
- 2× ISA slot
- 1× A4000 CPU slot - an A4000 processor board is required for Zorro III operation
- SCSI controller - Qlogic FAS216 controller IC, 50 pin internal SCSI header
- notes
- the ISA and video slots are inline with Zorro slots
- the PCI slots cannot be accessed by the Amiga in any way
- the video slot can be activated with the optional Video Slot Adapter
- the Zorro III slots are slower than the A3000 or A4000 slots
- connects to the trapdoor slot - the connector is passed through for accelerator cards
- the board is part of the Micronik Infinitiv tower system
- 2× 5.25" external drive bays
- 2× 3.5" external drive bays
- 2× 3.5" internal drive bays
- uprated power supply
front side
- MicronikA1200Z-3i.pdf
Operating Instructions Rev. 6.8
34 kB - MicronikA1200_Z1i_Z2i_Z-3i_Jumpers.pdf
Jumper Settings
20 kB
- MicronikA1200Z-3i-105.dms
SCSI Install Disk v1.05 Z-3i
112 kB
Manufacturer MicroniK, Germany | Date 1995 | Amiga A3000 |
- Zorro III busboard
- 7× Zorro III slots
- 1× video slot
- 6× ISA slots
- the video and ISA slots are all inline with a Zorro slot
- replaces the original A3000 desktop daughterboard
- the board is part of the Micronik A3000 Classic tower system, it cannot be fitted into the original A3000 desktop case
- 6× 5.25" external drive bays
- 3× 3.5" external drive bays
- 2× 3.5" internal drive bays
- optional 250W power supply
front side
back side
Manufacturer MicroniK, Germany | Date 1995 | Amiga A4000 |
- ISA version - Micronik 6960
- 7× Zorro III slots
- 2× extended video slots
- 5× ISA slots
- PCI version - Micronik 6980
- 7× Zorro III slots
- 1× extended video slot
- 3× PCI slots (cannot be accessed by the Amiga in any way)
- 3× ISA slots
- notes
- the video and ISA slots are all inline with a Zorro slot
- replaces the original A4000 daughterboard
- the board is part of the Micronik A4000 Classic tower system, it cannot be fitted into the original A4000 case
- 6× 5.25" external drive bays
- 3× 3.5" external drive bays
- 2× 3.5" internal drive bays
- optional 250W power supply
front side
back side
- Micronik_A4000.pdf
Assembly Instructions (english/german)
130 kB
Manufacturer RBM Digitaltechnik, Germany | Date 1997 | Amiga A1200 | Interface trapdoor slot |
- Zorro busboard
- 5× Zorro II slots
- does not support DMA - many SCSI cards are ruled out
- does not comply with the Zorro II specifications:
- /XRDY (External Ready - used for adding wait states) is halfways implemented
- /OVR (/DTACK Override - used for delaying Zorro bus cycle termination) is not implemented at all
- as a side effect it is possible to achieve 2-cycle Zorro accesses - faster than other Zorro boards if the card can take advantage of it
- optional extended video slot - VidiON ex module
- a Zorro III upgrade with A4000 style CPU slot (TurboON 32) was planned but never realised
- connects to the trapdoor slot - the connector is passed through for accelerator cards
- the board is part of the RBM Towerhawk 1200 IIex tower system
- ONBoard1200ex-de.pdf
user manual (german)
412 kB - ONBoard1200ex.pdf
user manual (english)
423 kB
Manufacturer RBM Digitaltechnik, Germany | Date 1996 | Amiga A4000 |
- Zorro III busboard
- 7× Zorro III slots
- 2× extended video slots
- 5× ISA slots
- the video and ISA slots are all inline with a Zorro slot
- only the first four Zorro slots are DMA capable
- designed only as a double sided PCB, not as a multi layer one (with dedicated ground and power layers) as requested in the Zorro III specifications
- replaces the original A4000 daughterboard
- the board is part of the Towerhawk 4000 tower system
front side
Manufacturer Eagle Computer Products, Germany | Date 1997 | Amiga A4000 |
- Zorro III and PCI busboard
- 7× Zorro II/III slots - only 4 is DMA capable
- 2× extended video slots
- 3× PCI slots (cannot be accessed by the Amiga in any way)
- 2× ISA slots
- 1× PCI/ISA single board computer (SBC) slot
- PC cards
- the SBC slot can take any industrial all-in-one PC card, for example:
- Siliconrax SBC cards
- Pentitrator (offered by the US distributor, AntiGravity)
- Speedfire (offered by Eagle)
- activates the PCI and ISA slots
- an SBC card is not a BridgeBoard, it cannot use Amiga resources, it requires its own memory, graphics card, drives, etc.
- Eagle and AntiGravity offered HiQ's Siamese system to integrate the Amiga and PC parts
- notes
- the video and ISA slots are all inline with a Zorro slot
- replaces the original A4000 daughterboard
- the board requires the Eagle 4000 tower system, it cannot be fitted into the original A4000 case
back side
front side
back side
front side