Amiga Hardware DatabaseSearch Result
8 expansions found
Manufacturer C-Ltd., USA | Date 1987 | Amiga A1000 | Interface side expansion port | Autoconfig ID 1004 / 12 |
- SCSI Controller
- AMD 5380 controller IC
- uses polled I/O transfers
- does not autoboot, reads CLtd.device from floppy
- DB25 external SCSI connector, intended to be used with a drive enclosure supplied by C-Ltd
- 50 pin internal SCSI header - but there is no space for mounting a hard disk inside the case
- A-Max II driver (cltd.amhd)
- controller reaches data transfer speeds of 600 kBit/s (burst) or 350 kBit/s (sustained) on stock A1000, and up to 1.2 MBit/s (burst) or 600 kBit/s (sustained) on A1000s equipped with 68020 or 68030 accelerator board
- required current from the expansion bus: approx. 450 mA
front side
- C-Ltd_SCSI_Adapters.pdf
Instruction Manual
17.2 MB - C-Ltd_SCSI_TRM.pdf
SCSI Technical Reference Manual
15.4 MB
- CltdUtils.lha
Aminet
replacement utilities
38 kB - scsicltd12.lha
Aminet
replacement driver v1.2
20 kB
Advert (US)
1987-03
Advert (US)
1987-03
Advert (DE)
1987-06
Advert (DE)
1987-11
Manufacturer C-Ltd., USA | Date 1987 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 1004 / 12 |
- SCSI Controller
- AMD 5380 controller IC
- uses polled I/O transfers
- does not autoboot, reads CLtd.device from floppy
- DB25 external SCSI connector
- 50 pin internal SCSI header - but there is no space for mounting a hard disk on the card
- A-Max II driver (cltd.amhd)
- two screw holes to mount a SCSI-to-MFM converter card
- controller reaches data transfer speeds of 600 kBit/s (burst) or 350 kBit/s (sustained) on stock A2000, and up to 1.2 MBit/s (burst) or 600 kBit/s (sustained) on A2000s equipped with 68020 or 68030 accelerator board
- required current from the expansion bus: approx. 450 mA
front side
with SCSI-MFM converter, front side
back side
- C-Ltd_SCSI_Adapters.pdf
Instruction Manual
17.2 MB - C-Ltd_SCSI_TRM.pdf
SCSI Technical Reference Manual
15.4 MB
- CltdUtils.lha
Aminet
replacement utilities
38 kB - scsicltd12.lha
Aminet
replacement driver v1.2
20 kB
Manufacturer C-Ltd., USA | Date 1987 | Amiga A500 | Interface side expansion port | Autoconfig ID 1004 / 12 |
- SCSI Controller
- AMD 5380 controller IC
- uses polled I/O transfers
- does not autoboot, reads CLtd.device from floppy
- DB25 external SCSI connector, intended to be used with a drive enclosure supplied by C-Ltd
- 50 pin internal SCSI header - but there is no space for mounting a hard disk inside the case
- A-Max II driver (cltd.amhd)
- controller reaches data transfer speeds of 600 kBit/s (burst) or 350 kBit/s (sustained) on stock A500, and up to 1.2 MBit/s (burst) or 600 kBit/s (sustained) on A500s equipped with 68020 or 68030 accelerator board
- required current from the expansion bus: approx. 250 mA
- C-Ltd_SCSI_Adapters.pdf
Instruction Manual
17.2 MB - C-Ltd_SCSI_TRM.pdf
SCSI Technical Reference Manual
15.4 MB
Manufacturer CardCo / C-Ltd., USA | Date 1986 | Amiga A1000 | Interface side expansion port | Autoconfig ID 1004 / 245 |
- 32 DIP sockets for 1 MB RAM
- 256k×1, 150 ns DIPs
- the memory is autoconfigured under KickStart 1.2
- Intel C8208 DRAM controller
- all components are socketed
- connects to the side expansion port
- optional passthrough connector - multiple aMEGA boxes can be connected together
- early versions were buggy and generated too much wait-states, performing slower than Chip RAM - cutting a trace and soldering a wire fixes it
front side
front side
PCB, front side
- aMEGA.dms
install disk
292 kB
Advert (US)
1986-07
Advert (US)
1987-01
Advert (US)
1987-03
Advert (DE)
1987-06
Manufacturer C-Ltd., USA | Date 1989 | Amiga A500 | Interface trapdoor slot, Gary socket |
- 16 DIP sockets
- 512 kB with 256k×1 DIPs
- 2 MB with 256k×4 DIPs
- connects to the trapdoor slot
- the 2 MB version is supplied with a Gary adaptor
- battery backed up clock
front side
back side
Manufacturer C-Ltd., USA | Date 1989 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 1004 / 42050 / 4 |
- SCSI Controller
- AMD 5380 controller IC
- dual-buffered pseudo-DMA design
- autoboot ROM - autobooting requires Kickstart 1.3
- place for two 3.5" hard disks on the card (on both sides)
- 50 pin internal header
- DB25 external connector
- supports SCSI network sharing
- controller reaches data transfer speeds of 1.2 MBit/s (burst) or 600 kBit/s (sustained) on stock A2000, and up to 2 MBit/s (burst) or 1 MBit/s (sustained) on A2000s equipped with 68020 or 68030 accelerator board
front side
front side
back side
back side
- C-Ltd_SCSI_Adapters.pdf
Instruction Manual
17.2 MB - C-Ltd_SCSI_TRM.pdf
SCSI Technical Reference Manual
15.4 MB
- Kronos.bin
ROM image
8 kB - Kronos_Autoboot-30.dms
Autoboot Disk v3.0
318 kB - Kronos_Utilities-30.dms
Utilities Disk v3.0
327 kB
Advert (DE)
1989-10
Advert (DE)
1989-11
Advert (DE)
1990-02
Manufacturer C-Ltd., USA | Date 1989 | Amiga A1000 | Interface side expansion port | Autoconfig ID 1004 / 42050 / 4 |
- SCSI Controller
- AMD 5380 controller IC
- dual-buffered pseudo-DMA design
- autoboot ROM - autobooting requires Kickstart 1.3
- has a 50 pin internal header but there is no space for a drive inside the case
- DB25 external connector
- supports SCSI network sharing
- passthrough connector
- controller reaches data transfer speeds of 1.2 MBit/s (burst) or 600 kBit/s (sustained) on stock A1000, and up to 2 MBit/s (burst) or 1 MBit/s (sustained) on A1000s equipped with 68020 or 68030 accelerator board
front side
back side
- C-Ltd_SCSI_Adapters.pdf
Instruction Manual
17.2 MB - C-Ltd_SCSI_TRM.pdf
SCSI Technical Reference Manual
15.4 MB
- Kronos_Autoboot-30.dms
Autoboot Disk v3.0
318 kB - Kronos_Utilities-30.dms
Utilities Disk v3.0
327 kB
Manufacturer C-Ltd., USA | Date 1987 | Amiga A1000 | Interface Keyboard Port |
- clock
- battery backed up clock
- connects between the A1000 and the keyboard
- intercepts every keystroke before it's sent to the computer
- allows the creation of keyboard macros, a combination of two or more keys which are translated into whole strings of characters
- a predefined set of macros is already saved in EPROM
- features an 8 bit microprocessor, 8 kB RAM and 8 kB EPROM
- needs no special software to set the Amiga's clock, it simply sends an AmigaDOS Date command with the current date and time
- the clock is controlled by the Help key + one of the function keys (eg. Help + F4 allows setting the clock, Help + F5 reads the current time)
- the 'auto macro' feature automatically plays a macro after booting
- optional password function (without the proper password the Amiga does not boot) - the maximum password length is 4 characters
- command history for up to 1000 characters
- two different versions for american and german keyboard layouts
- all chips are socketed
Interior, front side
Exterior, front side
Advert (DE)
1987-06
Advert (DE)
1987-11
Advert (DE)
1987-12