Amiga Hardware DatabaseHersteller “Reiter Software”
1 Erweiterung in der Datenbank
Hersteller Reiter Software, Kanada | Datum 1987 | Amiga A500, A1000 | Schnittstelle seitl. Erweiterungsport |
Nur englische Beschreibung vorhanden:
- ST-506 controller
- serves as host for IBM compatible HD controller cards
- supported controller cards (A1000 version):
- Western Digital WX1 or DTC5150
- Western Digital WX2, but drives attached are limited to 20 MB
- National Computer NDC5127-50, but 2.5 times slower than the WX1
- the A500 version supports the Western Digital DTC5150 / 5160 cards only
- the controller card is connected to the WEDGE card through a backplane with 8 bit XT slots - multiple controllers are supported by using a backplane with additional XT slots
- basically the WEDGE hardware just maps the 8 bit I/O memory space of an attached card to the Amiga memory space ($EA0000 by default)
- with proper software the WEDGE can be used with any type of XT cards (like serial cards or disk interfaces)
- uses programmed I/O transfers
- does not autoconfig
- connects to the side expansion port
- no passthrough connector
- the system was sold either as a single WEDGE card or as complete package containing WEDGE, backplane, WX1 or DTC5150 controller card, case with power supply and a 20 MB or 40 MB MiniScribe hard disk drive
Rückseite
Vorderseite
mit Controller, Vorderseite