Amiga Hardware DatabaseManufacturer “Zeus Electronic Development”
3 expansions in database
Manufacturer Zeus Electronic Development, Germany | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2189 / 1514 / 112 |
- Ethernet interface
- AMD Am7990 or Am79C90 Ethernet controller chip
- 32 kB buffer
- 10Base2 (BNC) and 10Base5 (AUI) connectors
- socket for optional boot EPROM
- A2065 emulation mode - selectable by jumper
- uses the drivers of the A2065
- even the autoconfig IDs are set to the A2065's
- the 79C90 IC may cause compatibilty problems, it is advisable replace it with a 7990, which is also on the A2065
- the native mode uses a slightly different memory layout which allows an additional ROM on the board (though there is no empty socket for it)
- SANA II compatible
- slightly faster than the Commodore A2065
- the BNC port is sometimes unreliable, the card works best with the AUI port
front side
front side
back side
- ConneXion.pdf
user manual (german)
48 kB
Manufacturer Zeus Electronic Development, Germany | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2189 / 3 |
- ISDN-In and ISDN-Out connectors
- supported by NetBSD
- specifications unknown
Manufacturer Zeus Electronic Development, Germany | Date 1997 | Amiga A2000, A3000, A4000 | Interface Zorro II | Autoconfig ID 2189 / 4 |
- serial interface
- eight serial ports
- 75-57600 bps transfer speed including the 31250 bps MIDI rate
- eight serial interface chips
- microprocessor running at 11.1 MHz, could be pushed to 14.7 MHz
- each port has an 8 byte buffer for both status and data
- independent transfer speeds for every channel
front side
back side