Amiga Hardware DatabaseManufacturer “Tröps & Hierl Computertechnik”
4 expansions in database
Manufacturer Tröps & Hierl Computertechnik, Germany | Date 1989 | Amiga A2000, A3000, A4000 | Interface Zorro II |
- EPROM burner
- EPEX = "Epromexpreß"
- 2× 28 pin Textool sockets on separate board, connects to 40 pin header on EPEX board via ribbon cable
- 2 sockets allow word writes or copy operations
- supply voltage only enabled during read or write operations
- supply voltage for burning raised to 6V
- supports any EPROMs of the 27xxx series up to 27011
- four programming algorithms including pulse code
- software supports burning Kickstart EPROMs (4× 27512) from a Kickstart disk
- built-in monitor
Advert (DE)
1989-01
Advert (DE)
1989-04
Advert (DE)
1989-06
Advert (DE)
1989-11
Advert (DE)
1989-12
Manufacturer Tröps & Hierl Computertechnik, Germany | Date 1990 | Amiga A500 | Interface trapdoor slot, Gary socket |
- 512 kB RAM - expandable to 1.8 MB with the Mega Modul
- four 256k×4 (41256) DIPs soldered onto the board
- connects to the trapdoor slot
- battery backed up clock - can be write protected
- disable switch
- optional Mega Modul
- twelve DIP sockets with 1.5 MB RAM
- 256k×4 DIPs
- only 1.8 MB is utilized of the total 2 MB
- requires at least Kickstart 1.3
- the Mega Modul is connected in between the trapdoor connector and the ERAM Mega
- an adaptor board is installed into the Gary's socket and connected to the Mega Modul
front side
back side
Advert (DE)
1989-12
Advert (DE)
1990-01
Advert (DE)
1990-05
Advert (DE)
1991-07
Manufacturer Tröps & Hierl Computertechnik, Germany | Date 1988 | Amiga A2000 | Interface Zorro II |
- No description available.
Do you own this expansion, or have information about it? Please let us know.
Advert (DE)
1988-04
Manufacturer Tröps & Hierl Computertechnik, Germany | Date 1987 | Amiga A1000 | Interface side expansion port |
- No description available.
Do you own this expansion, or have information about it? Please let us know.
Advert (DE)
1987-08
Advert (DE)
1987-12