Hersteller “Solid State Leisure”
3 Erweiterungen in der Datenbank
A5000 B5000 B5000 Combo
Prozessor
CPU: 68020 @ 16.67 MHz
FPU: PGA-Sockel für optionale FPU
die FPU ist asynchron bis 60 MHz (zus. Oszillator) oder synchron zur CPU getaktet (16.67 MHz)
MMU: keine
Speicher
bietet bis zu 4 MB FastRAM
Anzahl der Steckplätze: 32
benötigter Speichertyp: DIP, 256k×4, 80ns
mögliche Speicherkonfigurationen: 1, 2, 3 oder 4 MB
1 MB RAM ab Werk installiert
Speicher ist in 4 Bänken organisiert und muss von rechts nach links installiert werden
keine Autokonfiguration des Speichers
Hardware-Maprom
unterstützt kein DMA zum 32-Bit-RAM - dies beeinflusst den A590 negativ (DMAfix hilft)
Speichertransfers erreichen 18.7 MByte/s
Bemerkungen
Installation in den 68000-Sockel, der 68000 wird auf der Erweiterung installiert
68000-Rückfallmodus - per Software kann vom 68030 auf den 68000 geschaltet werden, aber nicht zurück; der Rechner muss ausgeschaltet werden
HDToolBox funktioniert nicht korrekt mit dieser Karte, ausser im Rückfallmodus
Speicher ist im Rückfallmodus nicht verfügbar
Vorderseite
Vorderseite
Rückseite
A5000-40.dms
Install Disk v4.0 S.S.L. Memory Allocation Tool v2.0 468 kB
Werbung (GB) 1990-06 Werbung (GB) 1990-07 Werbung (GB) 1990-11 Werbung (FR) 1990-11 Werbung (GB) 1991-03
Nur englische Beschreibung vorhanden:
processor
68030 @ 25 or 68EC030 @ 40 MHz, PGA
optional 68882 @ 25 - 50 MHz, PGA
memory
eight 30 pin SIMM sockets
4 MB RAM installed, expandable to 32 MB
supports 1 or 4 MB, 70 ns SIMMs
accepts SIMMs in groups of four giving 4, 8, 16, 20 or 32 MB RAM
non-autoconfiguring
burst RAM access
hardware maprom
notes
does not support DMA to its 32 bit RAM - DMAfix solves this
after a reboot, DMA into Zorro II memory larger than 512 bytes causes the machine to hang, this affects the A2091 but not the GVP Series II - DMAfix helps here too
68000 fallback mode - the software can switch from 68030 to 68000 but cannot switch back, the machine has to be switched off
memory is not available in fallback mode