Amiga Hardware DatabaseManufacturer “Pro-Computer”
3 expansions in database
Manufacturer Flesch und Hörnemann Computer / Pro-Computer | Date 1988 | Amiga A500, A1000 | Interface side expansion port |
- OMTI controller
- the 62 pin OMTI5520 (ST412/506) controller card is installed in an external housing, together with the power supply and an 5.25" hard disk
- this external box is attached by a cable to a small interface box which connects to the side expansion port
- passthrough connector
- the Amigos interface daughterboard can be upgraded with the Promigos autoboot daughterboard (1989) - autobooting requires Kickstart 1.3
- both the external box and the interface box can be exchanged with other makes - FSE, Golem, Comspec
- can use FSE Boil or Elaborate Bytes ALF 2 driver software
Interface, left side
Interface, right side
Interface, top side
Interface, rear side
Hard disk unit, front side
Hard disk unit, case opened, front side
- Boil241.dms
install disk v2.41
268 kB - Boil252.dms
install disk v2.52
269 kB - ProMigos_30.dms
install disk v3.0
354 kB
Manufacturer Pro-Computer, Germany | Date 1990 | Amiga A500 | Interface trapdoor slot |
- 512 kB RAM
- four 256k×4 chips
- battery backed up clock
- disable switch
- connects to the trapdoor slot
front side
back side
Manufacturer Pro-Computer, Germany | Amiga A2000, A3000, A4000 | Interface Zorro II |
- autobooter
- provides autoboot functionality for the Commodore A2090 SCSI controller
- two autoboot ROMs
- autoboots with Kickstart 1.2 and 1.3
front side